UNS R58030 Ti Alloy
Our advantages
UNS R58030 properties and heat treatment forged piece, Including UNS R58030 application and specifications, We have all specifications，Including UNS R58030 steel plate, UNS R58030 sheet, UNS R58030 square steel, UNS R58030 flat bar,UNS R58030 round bar,UNS R58030 forgings, we can own production and sales.
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
forged/hot rolling/ extrusion of steel
We can produce the UNS R58030 has the following specifications:
Round bar steel: 1mm to 3000mm
Square-shape steel: 1mm to 2000mm
Plate steel:0.1mm to 2500mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Chemical composition % of the ladle analysis of grade UNS R58030 and Standards
Titanium Beta III (Ti-11.5Mo-6Zr-4.5Sn; Grade 10), Solution Treated, Unaged
Categories: Metal; Nonferrous Metal; Titanium Alloy; Beta Titanium Alloy
Material Notes: 5 other heat treatments of this alloy are in MatWeb.
Key Words: Ti-11.5Mo-6Zr-4.5Sn; UNS R58030; Beta 3
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 5.06 g/cc | 0.183 lb/in³ | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Vickers | 240 | 240 | |
| Tensile Strength, Ultimate | 725 MPa | 105000 psi | |
| Tensile Strength, Yield | 620 MPa | 89900 psi | |
| Elongation at Break | 15.0 % | 15.0 % | |
| Reduction of Area | 65.0 % | 65.0 % | |
| Modulus of Elasticity | 79.0 GPa | 11500 ksi | |
| Compressive Yield Strength | 800 MPa | 116000 psi | |
| Poissons Ratio | 0.360 | 0.360 | |
| Fracture Toughness | 160 MPa-m½ | 146 ksi-in½ | K(IC) |
| Shear Modulus | 27.0 GPa | 3920 ksi | |
| Shear Strength | 590 MPa | 85600 psi | Ultimate shear strength |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.000156 ohm-cm | 0.000156 ohm-cm | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear |
7.60 µm/m-°C @Temperature 20.0 - 100 °C |
4.22 µin/in-°F @Temperature 68.0 - 212 °F |
|
|
8.10 µm/m-°C @Temperature 20.0 - 315 °C |
4.50 µin/in-°F @Temperature 68.0 - 599 °F |
average | |
|
8.70 µm/m-°C @Temperature 20.0 - 540 °C |
4.83 µin/in-°F @Temperature 68.0 - 1000 °F |
average | |
| Specific Heat Capacity | 0.525 J/g-°C | 0.125 BTU/lb-°F | Typical value for titanium alloys. |
| Thermal Conductivity | 6.28 W/m-K | 43.6 BTU-in/hr-ft²-°F | |
| Melting Point | 1573 - 1690 °C | 2863 - 3070 °F | |
| Solidus | 1573 °C | 2863 °F | |
| Liquidus | 1690 °C | 3070 °F | |
| Beta Transus | 760 °C | 1400 °F | Slow transition kinetics |
| Component Elements Properties | Metric | English | Comments |
| Molybdenum, Mo | 11.5 % | 11.5 % | |
| Tin, Sn | 4.50 % | 4.50 % | |
| Titanium, Ti | 78.0 % | 78.0 % | |
| Zirconium, Zr | 6.0 % | 6.0 % | |
Users viewing this material also viewed the following:
Titanium Beta III (Ti-11.5Mo-6Zr-4.5Sn; Grade 10), ST 720°C, Aged 550°C
Titanium Ti-3Al-2.5V (Grade 9), Alpha-Beta Anneal, Quenched
Titanium Ti-11.5Mo-6Zr-4.5Sn, ST 720°C, Aged 495°C
Titanium Beta C (Ti-3Al-8V-6Cr-4Mo-4Zr) Solution Treated 815°C
Titanium Ti-5-5-2-3 (Ti-5Mo-5V-2Cr-3Al), 12 mm Rod, Aged
MTB030 / 14152
Machining performance
Download UNS R58030 the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.
