X7CrTi 12 Stainless Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Stainless Steel | X7CrTi 12 | |||
1.4582 |
|||||
1.4583 |
|||||
1.4586 |
|||||
1.4712 |
|||||
1.4700 |
|||||
X10CrSi6 |
|||||
8CrSi 7-7 |
|||||
X10CrAlSi 7 |
|||||
X10CrA17 |
|||||
1.4713 |
C ≤ |
Si |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni | Other |
---|---|---|---|---|---|---|---|
0.08 | ≤1.00 | 1.00 | 0.040 | 0.030 | 10.5-12.5 | Ti≥6*C≤1.00 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
264 (≥) | 459 (≥) | 31 | 44 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.34 | - | |||
982 | 259 | - | 23.3 | 222 | - | ||
596 | - | 32 | 33.2 | 341 | 411 |
Heat treated : 1162°C - 1191°C
Grade | Standard | Country | Application |
---|---|---|---|
X7CrTi12 | DIN | Germany | Stainless steel |
UNS G10120 | UNS | USA | General use carbon steel bar |
T12 | China | Carbon tool steel | |
Cr12 | China | Alloy tool steel - cold work steels | |
Cr12Mo1V1 | China | Alloy tool steel - cold work steels | |
Cr12MoV | China | Alloy tool steel - cold work steels | |
SMCr12Mo1V1 | China | Plastic mould with flat steel | |
W12Cr4V5Co5 | China | High-speed tool steel | |
H12 | ASTM | USA | Alloy tool steel |
T20812 | UNS | USA | Alloy tool steel |
H13 | ASTM | USA | Alloy tool steel |
T12002 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12004 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12005 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12006 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12008 | UNS | USA | Tungsten series High-Speed Tool Steel |
T12015 | UNS | USA | Tungsten series High-Speed Tool Steel |
CH-12 | ASTM | USA | Casting tool steels and powder metallurgy tool steel |
CQ-12 | AISI | USA | W-Co class carbide |
CY-12 | AISI | USA | W-Ti-Co class carbide |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com