410 Stainless Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Stainless Steel | 410 | |||
S44660 |
|||||
29-4 |
|||||
S44700 |
|||||
29-4C |
|||||
S44735 |
|||||
29-4-2 |
|||||
S44800 |
|||||
S46800 |
|||||
403 |
|||||
S40300 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.15 | 1.00 | 1.00 | 0.040 | 0.030 | 11.5-13.5 | ≤0.75 |
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
216 (≥) | 138 (≥) | 12 | 11 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 234 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
13 | - | - | 0.24 | - | |||
624 | 631 | - | 12.3 | 342 | - | ||
266 | - | 13 | 32.2 | 241 | 323 |
Heat treated : 1245°C - 1482°C
Grade | Standard | Country | Application |
---|---|---|---|
S41008 | USA | Martensitic special steel | |
S41008 | USA | Martensitic special steel | |
Type410S | UNS | USA | Martensitic special steel |
Type410S | UNS | USA | Martensitic special steel |
Type410Cb(XM-30) | UNS | USA | Martensitic special steel |
Type410Cb(XM-30) | UNS | USA | Martensitic special steel |
S41040 | UNS | USA | Martensitic special steel |
S41040 | UNS | USA | Martensitic special steel |
S41050 | UNS | USA | Martensitic special steel |
S41050 | UNS | USA | Martensitic special steel |
UNS S41041 | UNS | USA | precipitation hardening |
UNS S41041 | UNS | USA | precipitation hardening |
UNS H15410 | UNS | USA | precipitation hardening |
UNS G31410 | UNS | USA | precipitation hardening |
SUS410L | JIS | Japan | ferritic stainless steels |
SUS410L | JIS | Japan | ferritic stainless steels |
SUS410 | JIS | Japan | Martensitic special steel |
SUS410J1 | JIS | Japan | Martensitic special steel |
SUS410F2 | JIS | Japan | Martensitic special steel |
SUS410S | JIS | Japan | martensitic stainless steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com