USA ASTM CY-5SnBiM Castings, Nickel and Nickel Alloy and CY-5SnBiM Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
| Category | Type | Steel Grade | Standard | Country | Application | 
|---|---|---|---|---|---|
| Steel Grades | Special Alloy | CY-5SnBiM | ASTM | USA | Castings, Nickel and Nickel Alloy | 
| M-30H | 
                                |||||
| M-25S | 
                                |||||
| M-30C | 
                                |||||
| N-12MV | 
                                |||||
| N-7M | 
                                |||||
| CY-40 | 
                                |||||
| CW-12MW | 
                                |||||
| CW-6M | 
                                |||||
| CW-2M | 
                                |||||
| CW-6MC | 
                                
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | Fe(%) | 
|---|---|---|---|---|---|---|---|---|
| 0.05 | 0.5 | 1.5 | 0.03 | 0.03 | 11.0-14.0 | Bal | 2.0-3.5 | ≤2.00 | 
| Yield Rp0.2 (MPa)  | 
                                            Tensile Rm (MPa)  | 
                                            Impact KV/Ku (J)  | 
                                            Elongation A (%)  | 
                                            Reduction in cross section on fracture Z (%)  | 
                                            As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 635 (≥) | 759 (≥) | 31 | 14 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 | 
| Temperature (°C)  | 
                                        Modulus of elasticity (GPa)  | 
                                        Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C)  | 
                                        Specific thermal capacity (J/kg·°C)  | 
                                        Specific electrical resistivity (Ω mm²/m)  | 
                                        Density (kg/dm³)  | 
                                        Poisson’s coefficient, ν | 
|---|---|---|---|---|---|---|---|
| 41 | - | - | 0.41 | - | |||
| 449 | 819 | - | 21.3 | 224 | - | ||
| 384 | - | 23 | 41.2 | 113 | 143 | 
Heat treated : 1137°C - 1525°C
| Grade | Standard | Country | Application | 
|---|---|---|---|
| CY-5SnBiM | AISI | USA | |
| CY-5SnBiM | ASTM | USA | Castings, Nickel and Nickel Alloy | 
| CY-5SnBiM | ASTM | USA | Castings, Nickel and Nickel Alloy | 
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com