Thermax 70 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Thermax 70 | |||
Ta Z 8A |
|||||
Ta Z 8B |
|||||
Tenelon |
|||||
Thermax 12 |
|||||
Thermax 17C |
|||||
Thermax 25 |
|||||
Thermax 30 |
|||||
Thermax 37 |
|||||
Thermax 45 |
|||||
Thermax 60 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.4-0.5 | 1.2 | 1.5 | 26-29 | 45-50 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
557 (≥) | 287 (≥) | 22 | 32 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 124 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
34 | - | - | 0.33 | - | |||
117 | 153 | - | 12.3 | 411 | - | ||
342 | - | 23 | 14.2 | 222 | 311 |
Heat treated : 1193°C - 1317°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10170 | UNS | USA | General use carbon steel bar |
HAP 70 | AISI | USA | Powder metallurgy high-speed tool steel |
C70W1 | Germany | Carbon tool steel | |
C70W2 | DIN | Germany | Carbon tool steel |
1.2703 | DIN | Germany | Cold working alloy tool steel |
1.2709 | DIN | Germany | Cold working alloy tool steel |
70Si7 | DIN | Germany | Cold working alloy tool steel |
SK70 | JIS | Japan | Carbon tool steel |
TC70 | JIS | Japan | Carbon tool steel |
SS14:1770 | SS | Sweden | Carbide for cutting tools |
SS14:1770 | SS | Sweden | Carbide for cutting tools |
SS14:— | SS | Sweden | Carbide for cutting tools |
SS14:— | SS | Sweden | Carbide for cutting tools |
SS14:2700 | SS | Sweden | Carbide for cutting tools |
SS14:2700 | SS | Sweden | Carbide for cutting tools |
S14:2705 | SS | Sweden | Carbide for cutting tools |
C70U | Carbide for cutting tools | ||
C70U | Carbide for cutting tools | ||
UNS S15700 | UNS | USA | precipitation hardening |
UNS S15700 | UNS | USA | precipitation hardening |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com