S13800 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | S13800 | |||
S35000 |
|||||
634 |
|||||
S35500 |
|||||
635 |
|||||
S17600 |
|||||
XM-9 |
|||||
S36200 |
|||||
XM-12 |
|||||
S15500 |
|||||
XM-13 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.05 | 0.1 | 0.2 | 0.01 | 0.03 | 12.3-13.2 | 7.5-8.5 |
Mo | Al | Cu | Nb | Ti | V | Ce |
2-2.5 | 0.9-1.35 | |||||
N | Co | Pb | B | Other | ||
0.01 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
832 (≥) | 713 (≥) | 23 | 33 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
41 | - | - | 0.24 | - | |||
675 | 197 | - | 22.3 | 423 | - | ||
654 | - | 22 | 21.2 | 243 | 113 |
Heat treated : 1341°C - 1425°C
Grade | Standard | Country | Application |
---|---|---|---|
AISI S13800 | USA | precipitation hardening | |
UNS S13800 | UNS | USA | precipitation hardening |
S13800 | UNS | USA | Martensitic special steel |
S13800 | UNS | USA | Martensitic special steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com