RA 333 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | RA 333 | |||
Pyrowear 675 |
|||||
R-20 |
|||||
R 35 |
|||||
R 39 |
|||||
R-235 |
|||||
RA 85H |
|||||
RA 330 |
|||||
RA 330 Mod. |
|||||
RA 330 TX |
|||||
RA 330-04 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.04 | 1.15 | 1 | 25.5 | ... | ||
Mo | Al | Cu | Nb | Ti | W | Fe |
3.25 | 3.25 | 0.1 | 3.25 | 17 | ||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
784 (≥) | 328 (≥) | 34 | 21 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 233 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
14 | - | - | 0.22 | - | |||
469 | 487 | - | 12.3 | 443 | - | ||
566 | - | 13 | 23.2 | 424 | 241 |
Heat treated : 1535°C - 1377°C
Grade | Standard | Country | Application |
---|---|---|---|
Uranus50 | UNS | USA | Dual-phase steel |
Uranus50 | UNS | USA | Dual-phase steel |
erralium255 | UNS | USA | Dual-phase steel |
erralium255 | UNS | USA | Dual-phase steel |
Valray1 | AISI | USA | Martensitic special steel |
X2NiCrAITi32-20 | DIN | Germany | Stainless steel |
X10CrAISi7/X10CrAI7 | DIN | Germany | Stainless steel |
X10CrAISi13/X10CrAI13 | DIN | Germany | Martensitic special steel |
X10CrAISi18/X10CrAI18 | DIN | Germany | Stainless steel |
X10CrAISi25/X10CrAI24 | DIN | Germany | Stainless steel |
X10NiCrAITi32-21(20) | DIN | Germany | Stainless steel |
X5NiCrAlTi31-20 | DIN | Germany | The high-temperature and high-strength steel |
X8NiCrAlTi32-21 | DIN | Germany | The high-temperature and high-strength steel |
X6CrAl13 | AFNOR | France | Ferritic |
X2CrAlTi18-2 | AFNOR | France | Ferritic |
ASTM A335 GRADE P9 | ASTM | USA | Seamless Ferritic Alloy Steel Pipe for High-Temperature Service |
ASTM A335 GRADE P91 | ASTM | USA | Seamless Ferritic Alloy Steel Pipe for High-Temperature Service |
ASTM A335 GRADE P92 | AMS | USA | Seamless Ferritic Alloy Steel Pipe for High-Temperature Service |
ASTM Grade N1 | ASTM | USA | |
ASTM Grade N2 | ASTM | USA |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com