MONEL alloy 404 High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | MONEL alloy 404 | |||
Matrix Ⅰ |
|||||
Matrix Ⅱ |
|||||
Micro Melt All (PM) |
|||||
Micro Melt All-LVC(PM) |
|||||
Micro Melt HS-30 |
|||||
Micro Melt Maxamet Alloy |
|||||
Moly Ascoloy |
|||||
Momarc |
|||||
MONEL alloy 400 |
|||||
MONEL alloy 401 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.15 | 0.1 | 0.1 | 0.024 | 52-57 | ||
Mo | Al | Cu | Nb | Ti | V | Fe |
≤0.05 | ... | ≤0.5 | ||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
698 (≥) | 781 (≥) | 12 | 22 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 412 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
22 | - | - | 0.12 | - | |||
364 | 164 | - | 43.3 | 434 | - | ||
231 | - | 33 | 21.2 | 331 | 442 |
Heat treated : 1462°C - 1873°C
Grade | Standard | Country | Application |
---|---|---|---|
Vicalloy | AISI | USA | Martensitic special steel |
Alloy 52 | SAE | USA | Alloy 52 is a 50.50% nickel-iron alloy developed for glass-to-metal seals for some of the soft glasses and some ceramics. The alloy’s rate of thermal expansion is virtually constant to a temperature of about 1050°F (565°C). |
Alloy 713C | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
Alloy 713LC | ASTM | USA | HIGH-TEMPERATURE HIGH-STRENGTH NICKEL BASE ALLOYS,CAST ALLOYS |
T30404 | ASTM | USA | Alloy tool steel |
S32404 | UNS | USA | Dual-phase steel |
S32404 | UNS | USA | Dual-phase steel |
1.4404 | austenitic special steel | ||
1.4404(AFNOR) | AFNOR | France | Austenite |
U40402 | China | China structural steel and alloy steel | |
U40452 | China | China structural steel and alloy steel | |
A20404 | China | China structural steel and alloy steel | |
EN X3CrNi1404KE | EN | Euronorm Stainless Steel | |
GH4043 | China | Age hardening type iron base alloy | |
GH4049 | China | Age hardening type iron base alloy | |
GH4049 | China | wrought Fe/Ni-base superalloy | |
DZ404 | China | Progress in Directionally Solidified Super Alloys | |
DD402 | China | Single-CrystalSuperalloy |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com