Deffer B High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | Deffer B | |||
Custom 475 |
|||||
Custom Fol 316 HQ |
|||||
Custom Fol 302 HQ |
|||||
D6A |
|||||
D-979 |
|||||
Delcrome alloy 50V |
|||||
Delcrome alloy 550 |
|||||
Delcrome alloy 600 |
|||||
Delcrome alloy C |
|||||
Delcrome alloy R |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
3.2 | 18 | |||||
Mo | Al | Cu | Nb | Ti | V | Ce |
16 | 2 | |||||
N | Co | Pb | B | Other | ||
6 | Fe... | |||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
111 (≥) | 865 (≥) | 22 | 33 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
41 | - | - | 0.44 | - | |||
977 | 325 | - | 33.3 | 122 | - | ||
839 | - | 43 | 41.2 | 214 | 232 |
Heat treated : 1731°C - 1778°C
Grade | Standard | Country | Application |
---|---|---|---|
Q215 B | China | Engineering and welding | |
Q255 B | China | Engineering and welding | |
BW1A | Carbon tool steel | ||
BW1B | Carbide for cutting tools | ||
BW1C | |||
BW1C | |||
BW2(1) | Carbide for cutting tools | ||
BW2(1) | Carbide for cutting tools | ||
BW2 | Carbide for cutting tools | ||
BW2 | Carbide for cutting tools | ||
BS1 | Carbide for cutting tools | ||
BS1 | Carbide for cutting tools | ||
BS2 | Carbide for cutting tools | ||
BS2 | Carbide for cutting tools | ||
BS2 | Carbide for cutting tools | ||
BS2 | Carbide for cutting tools | ||
BS5 | Carbide for cutting tools | ||
BS5 | Carbide for cutting tools | ||
BO1 | Carbide for cutting tools | ||
BO1 | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com