20Mo-6 HS High Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | High Alloy | 20Mo-6 HS | |||
18-15 |
|||||
18-17LC |
|||||
18-18-2 |
|||||
18-18-Plus |
|||||
18Cr-Cb |
|||||
HP-10 |
|||||
19-9DL |
|||||
19-9DX |
|||||
19-9-W-Mo |
|||||
20-45-5 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.06 | 0.05 | 1.00 | 0.030 | 0.030 | 22.0-26.0 | 33.0-37.2 |
Mo | Al | Cu | Nb | Ti | V | Ce |
5.0-6.0 | 1.0-3.0 | |||||
N | Co | Pb | B | Other | ||
0.17-0.40 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
877 (≥) | 376 (≥) | 24 | 11 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 242 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.33 | - | |||
573 | 928 | - | 11.3 | 341 | - | ||
291 | - | 43 | 41.2 | 132 | 221 |
Heat treated : 1617°C - 1316°C
Grade | Standard | Country | Application |
---|---|---|---|
CPM Rex M2HCHS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M4HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M35HCHS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 45HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex T15HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 76HS | AISI | USA | Powder metallurgy high-speed tool steel |
HS6-5-4-2 | AFNOR | France | Carbide for cutting tools |
HS6-5-4-2 | AFNOR | France | Carbide for cutting tools |
HS18-0-1 | AFNOR | France | Carbide for cutting tools |
HS18-0-1 | AFNOR | France | Carbide for cutting tools |
HS6-5-2 | AFNOR | France | Carbide for cutting tools |
HS6-5-2 | AFNOR | France | Carbide for cutting tools |
HS6-5-2HC | AFNOR | France | Carbide for cutting tools |
HS6-5-2HC | AFNOR | France | Carbide for cutting tools |
HS2-9-1 | AFNOR | France | Carbide for cutting tools |
HS2-9-1 | AFNOR | France | Carbide for cutting tools |
HS2-9-2 | AFNOR | France | Carbide for cutting tools |
HS2-9-2 | AFNOR | France | Carbide for cutting tools |
HS6-5-4 | AFNOR | France | Carbide for cutting tools |
HS6-5-4 | AFNOR | France | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com