UNS G10100

Favorite Datasheet

#UNS # #G10100

Description

UNS G10100 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Carbon Steel: UNS G10100

Category	Type	Steel Grade
Steel Grades	Carbon Steel	UNS G10100
		AISI 1052
		1.0036
		1.0037
		SAE J403
		ICI 8620
		ICI 8630
		ASTM 14Q
		ASTM 15A
		ICI 52100
		AISI 10521

Chemical composition(mass fraction)(wt.%) of the UNS G10100

AISI 1010 steel, hot rolled bar, 19-32 mm (0.75-1.25 in) round or thickness
Categories:	Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Low Carbon steel
Material Notes:	Easily cold formed by heading, extruding, upsetting, bending, and other deforming processes. Uses for wires include electroplated products, such as racks, storage bins, shopping carts, fan guards, and jewelry, and unplated such as wires, staples, hardware, and barbed wire.
Key Words:	UNS G10100, AMS 5040, AMS 5042, AMS 5044, AMS 5047, AMS 5053, ASTM A29, ASTM A108, ASTM A510, ASTM A519, ASTM A545, ASTM A549, ASTM A575, ASTM A576, MIL SPEC MIL-S-11310 (CS1010), JIS S 9 CK, SAE J403, SAE J412, SAE J414, DIN 1.1121, AFNOR XC 10 (Fr), JIS S10 C, JIS S 12 C

Physical Properties	Metric	English	Comments
Density	7.87 g/cc	0.284 lb/in³	Typical for steel

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	95	95
Hardness, Knoop	113	113	Converted from Brinell hardness.
Hardness, Rockwell B	55	55	Converted from Brinell hardness.
Hardness, Vickers	98	98	Converted from Brinell hardness.
Tensile Strength, Ultimate	325 MPa	47100 psi
Tensile Strength, Yield	180 MPa	26100 psi
Elongation at Break	28.0 %	28.0 %	in 50 mm
Reduction of Area	50.0 %	50.0 %
Modulus of Elasticity	200 GPa	29000 ksi	Typical for steel
Bulk Modulus	140 GPa	20300 ksi	Typical for steel
Poissons Ratio	0.290	0.290	Typical For Steel
Machinability	55 %	55 %	Based on AISI 1212 steel. as 100% machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing.
Shear Modulus	80.0 GPa	11600 ksi	Typical for steel

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.0000143 ohm-cm	0.0000143 ohm-cm	condition unknown

Thermal Properties	Metric	English	Comments
CTE, linear	12.2 µm/m-°C @Temperature 0.000 - 100 °C	6.78 µin/in-°F @Temperature 32.0 - 212 °F
	13.0 µm/m-°C @Temperature 0.000 - 200 °C	7.22 µin/in-°F @Temperature 32.0 - 392 °F
	13.5 µm/m-°C @Temperature 0.000 - 300 °C	7.50 µin/in-°F @Temperature 32.0 - 572 °F
	13.8 µm/m-°C @Temperature 0.000 - 400 °C	7.67 µin/in-°F @Temperature 32.0 - 752 °F
	14.2 µm/m-°C @Temperature 0.000 - 500 °C	7.89 µin/in-°F @Temperature 32.0 - 932 °F
	14.6 µm/m-°C @Temperature 0.000 - 600 °C	8.11 µin/in-°F @Temperature 32.0 - 1110 °F
	14.9 µm/m-°C @Temperature 0.000 - 700 °C	8.28 µin/in-°F @Temperature 32.0 - 1290 °F
Specific Heat Capacity	0.448 J/g-°C	0.107 BTU/lb-°F	condition unknown; 50-100°C (122-212°F)
	0.498 J/g-°C @Temperature 150 - 200 °C	0.119 BTU/lb-°F @Temperature 302 - 392 °F
	0.519 J/g-°C @Temperature 200 - 250 °C	0.124 BTU/lb-°F @Temperature 392 - 482 °F
	0.536 J/g-°C @Temperature 250 - 300 °C	0.128 BTU/lb-°F @Temperature 482 - 572 °F
	0.565 J/g-°C @Temperature 300 - 350 °C	0.135 BTU/lb-°F @Temperature 572 - 662 °F
	0.590 J/g-°C @Temperature 350 - 400 °C	0.141 BTU/lb-°F @Temperature 662 - 752 °F
	0.649 J/g-°C @Temperature 400 - 450 °C	0.155 BTU/lb-°F @Temperature 752 - 842 °F
	0.729 J/g-°C @Temperature 550 - 600 °C	0.174 BTU/lb-°F @Temperature 1020 - 1110 °F
	0.825 J/g-°C @Temperature 650 - 700 °C	0.197 BTU/lb-°F @Temperature 1200 - 1290 °F
Thermal Conductivity	51.9 W/m-K	360 BTU-in/hr-ft²-°F	Typical steel

Component Elements Properties	Metric	English	Comments
Carbon, C	0.080 - 0.13 %	0.080 - 0.13 %
Iron, Fe	99.18 - 99.62 %	99.18 - 99.62 %	As remainder
Manganese, Mn	0.30 - 0.60 %	0.30 - 0.60 %
Phosphorous, P	<= 0.040 %	<= 0.040 %
Sulfur, S	<= 0.050 %	<= 0.050 %

Users viewing this material also viewed the following:
AISI 1010 Steel, cold drawn
AISI 1010 Steel, cold drawn bar, 19-32 mm (0.75-1.25 in) round or thickness
AISI 1010 Steel, CQ sheet,1.6-5.8 mm round or thickness
AISI 1008 Steel, hot rolled bar, 19-32 mm (0.75-1.25 in) round
AISI 1008 Steel, cold drawn bar, 19-32 mm (0.75-1.25 in) round

M1010B / 6783

Mechanical Properties of steel grade UNS G10100

Yield R_p0.2 (MPa)	Tensile R_m (MPa)	Impact KV/Ku (J)	Elongation A (%)	Reduction in cross section on fracture Z (%)	As-Heat-Treated Condition	Brinell hardness (HBW)
273 (≥)	173 (≥)	34	44	11	Solution and Aging, Annealing, Ausaging, Q+T,etc	424

Physical Properties of steel grade UNS G10100

Temperature (°C)	Modulus of elasticity (GPa)	Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and	Thermal conductivity (W/m·°C)	Specific thermal capacity (J/kg·°C)	Specific electrical resistivity (Ω mm²/m)	Density (kg/dm³)	Poisson’s coefficient, ν
32	-	-			0.13	-
134	882	-	11.3	342		-
467	-	14	32.2			442	142

Heat Treatment of steel grade UNS G10100

Heat treated : 1298°C - 1138°C

Technological Curves of steel grade UNS G10100

No Curve

Cross Reference Table (Equivalent Grade) of UNS G10100

Grade	Standard	Country	Application
UNS G10300	UNS	USA	General use carbon steel bar
UNS G10050	UNS	USA	General use carbon steel bar
UNS G10060	UNS	USA	General use carbon steel bar
UNS G10080	UNS	USA	General use carbon steel bar
UNS G10110	UNS	USA	General use carbon steel bar
ASTM 1012	ASTM	USA	General use carbon steel bar
UNS G10120	UNS	USA	General use carbon steel bar
UNS G10130	UNS	USA	General use carbon steel bar
UNS G10150	UNS	USA	General use carbon steel bar
UNS G10160	UNS	USA	General use carbon steel bar
UNS G10170	UNS	USA	General use carbon steel bar
UNS G10180	UNS	USA	General use carbon steel bar
UNS G10190	UNS	USA	General use carbon steel bar
UNS G10200	UNS	USA	General use carbon steel bar
UNS G10210	UNS	USA	General use carbon steel bar
UNS T72301	UNS	USA	Carbon tool steel
W2-A	ASTM	USA	Carbon tool steel
UNS T72302	UNS	USA	Carbon tool steel
UNS S42800	UNS	USA	Martensitic special steel
UNS S43100	UNS	USA	Martensitic special steel

Available Suppliers

Jiangyou Longhai Special Steel Co.,Ltd.

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com

Do you supply this UNS G10100?
List your company on S&G now? Join
Non-paying users only

Stainless Steels

Tube/Pipe

Steel Profiles

Cold rolled/hot rolled

Wire rod

Quality special steel

Superalloy & High Temperature Alloy