EStE 500 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Carbon Steel | EStE 500 | |||
EStE 500 |
|||||
S500N |
|||||
P500NH |
|||||
1.8937 |
|||||
WStE 500 |
|||||
S500NL |
|||||
1.8917 |
|||||
TStE 500 |
|||||
1.8919 |
|||||
S500NL1 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.21 | 0.10~0.60 | 1.00-1.70 | 0.025 | 0.015 | ≤0.30 | ≤ 1.00 |
Mo | Al | Cu | Nb | Ti | V | Ce |
≤0.10 | ≥0.020 | ≤0.70 | ≤0.05 | ≤ 0.22 | ||
N | Co | Pb | B | Other | ||
≤0.020 | Nb+Ti+V≤0.22 | |||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
859 (≥) | 591 (≥) | 11 | 33 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
41 | - | - | 0.14 | - | |||
989 | 387 | - | 31.3 | 122 | - | ||
739 | - | 21 | 33.2 | 222 | 411 |
Heat treated : 1932°C - 1548°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS S15500 | UNS | USA | precipitation hardening |
AISI S15500 | AISI | USA | precipitation hardening |
UNS S35000 | UNS | USA | Martensitic special steel |
UNS S35000 | UNS | USA | Martensitic special steel |
UNS S35000 | UNS | USA | precipitation hardening |
UNS S35000 | UNS | USA | precipitation hardening |
UNS S35500 | UNS | USA | precipitation hardening |
UNS S35500 | UNS | USA | precipitation hardening |
UNS S45000 | UNS | USA | precipitation hardening |
UNS S45000 | UNS | USA | precipitation hardening |
UNS S45500 | UNS | USA | precipitation hardening |
UNS S45500 | UNS | USA | precipitation hardening |
S31500 | UNS | USA | Dual-phase steel |
S31500 | UNS | USA | Dual-phase steel |
S41500 | UNS | USA | Martensitic special steel |
S41500 | UNS | USA | Martensitic special steel |
S15500 | UNS | USA | Martensitic special steel |
S15500 | UNS | USA | Martensitic special steel |
S35500 | UNS | USA | precipitation hardening |
S35500 | UNS | USA | precipitation hardening |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com