X2CrNiMo 17-13-3 Alloy Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Alloy Steel | X2CrNiMo 17-13-3 | |||
X2CrNiMoN 17-13-3 |
|||||
X2CrNiMoN 17-13-5 |
|||||
X2CrNiMoN 22-5-3 |
|||||
X2CrNiMoN 25-7-4 |
|||||
X2CrNiMoN 29-7-2 |
|||||
X2CrNiMoSi 18-5-3 |
|||||
X2CrNiN18-10 |
|||||
X2CrNiN18-7 |
|||||
X2CrNiN 23-4 |
|||||
X2CrTi 12 |
C |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni | Mo | Other |
---|---|---|---|---|---|---|---|---|
≤0.030 | 1.00 | 2.00 | 0.045 | 0.015 | 16.5-18.5 | 10.5-13.0 | 2.50-3.00 | N ≤ 0.11 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
916 (≥) | 383 (≥) | 42 | 24 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
34 | - | - | 0.23 | - | |||
681 | 613 | - | 11.3 | 132 | - | ||
562 | - | 23 | 13.2 | 422 | 444 |
Heat treated : 1571°C - 1547°C
Grade | Standard | Country | Application |
---|---|---|---|
X2CrNiMo17-12-2 | AFNOR | France | Austenite |
X2CrNiMoN17-11-2 | AFNOR | France | Austenite |
X2CrNiMo17-12-3 | AFNOR | France | Austenite |
X2CrNiMo18-14-3 | AFNOR | France | Austenite |
X2CrNiMoN17-13-5 | AFNOR | France | Austenite |
X2CrNiMoN17-13-3 | AFNOR | France | Austenite |
X2CrNiMoN18-12-4 | AFNOR | France | Austenite |
X2CrNiMo18-15-4 | AFNOR | France | Austenite |
X2CrNiMoN22-5-3 | AFNOR | France | Austenitic-Ferrite |
X2CrNiMoCuN25-6-3 | AFNOR | France | Austenitic-Ferrite |
X2CrNiMoN25-7-4 | AFNOR | France | Austenitic-Ferrite |
X2CrNiMoCuWN25-7-4 | AFNOR | France | Austenitic-Ferrite |
X3CrNiMoBN17-13-3 | AFNOR | France | Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999)) |
ISO X2CrNiMo17-12-2 | ISO standard thermal deformation of stainless steel | ||
ISO X2CrNiMo17-12-3 | ISO standard thermal deformation of stainless steel | ||
ISO X2CrNiMo19-14-4 | ISO standard thermal deformation of stainless steel | ||
ISO X2CrNiMoN17-11-2 | ISO standard thermal deformation of stainless steel | ||
ISO X2CrNiMoN17-11-3 | ISO standard thermal deformation of stainless steel | ||
ISO X2CrNiMoN18-12-4 | ISO standard thermal deformation of stainless steel | ||
ISO X2CrNiMoN18-15-5 | ISO standard thermal deformation of stainless steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com