X12Ni5

Favorite Datasheet

#X12Ni5

Description

X12Ni5 Alloy Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Alloy Steel: X12Ni5

Category	Type	Steel Grade
Steel Grades	Alloy Steel	X12Ni5
		20Mn6
		1.1169
		14Ni6
		1.5622
		24Ni8
		1.5633
		12Ni14
		1.5637
		10Ni14
		1.5637

Chemical composition(mass fraction)(wt.%) of the X12Ni5

C ≤	Si ≤	Mn ≤	P ≤	S ≤	Cr	Ni
0.15	0.35	0.30-0.80	0.020	0.010		4.75-5.25
Mo	Al	Cu	Nb	Ti	V	Ce
					≤0.05
N	Co	Pb	B	Other
				Cr+Ni+Mo ≤0.50%

German DIN of low-temperature steel GangHao and chemical composition

LenMainly used for the construction of the low temperature LNG tanks, belong to the low-temperature steel 2 | comments approval
Ensure that its quench-hardening ability structural steel grades: 20 CrMnTiH standard GB/T 5216-1985 "chemical ingredients: carbon C: 0.17 ~ 0.23 Si Si: 0.17 ~ 0.37 Mn Mn: 0.80 ~ 1.15 sulfur S: allow residual content than 0.035 P P: allow residual content than 0.035 chromium Cr: 1.00 ~ 1.35 Ni Ni: allow residual content than 0.030 copper Cu: allow residual content than 0.030 titanium Ti: 0.04 ~ 0.10" mechanical properties: hardness: annealing or high temperature tempering, than 217 HB, diameter of 4.1 mm creasing frequency "heat treatment standards and analysis of metallographic organization:" delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract.

th: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ4-410 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries,with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and professionality.

Mechanical properties

ViTa llium Mechanical properties,Our production completely according to the ViTa llium standards to meet the ViTa llium mechanical performance, can also according to the customer request, to meet the requirements of customers of ViTa llium mechanical properties.

Heat treatment

ViTa llium Heat treatment,Our production completely according to the ViTa llium standards to meet the ViTa llium Heat treatment, can also according to the customer request, to meet the requirements of customers of ViTa llium Heat treatment.

Machining

ViTa llium Machining,Our production completely according to the ViTa llium standards to meet the ViTa llium Machining, can also according to the customer request, to meet the requirements of customers of ViTa llium Machining.

Welding performance

ViTa llium Welding performance,Our production completely according to the ViTa llium standards to meet the ViTa llium Welding performance, can also according to the customer request, to meet the requirements of customers of ViTa llium Welding performance.

ELECTRODE ARC FURNACE; (NON)VACUUM INDUCTION FURNACE; LF; VD; VOD; ESR; CONSUMABLE ELECTRODE VACUUM FURNACE.

Mechanical Properties of steel grade X12Ni5

Yield R_p0.2 (MPa)	Tensile R_m (MPa)	Impact KV/Ku (J)	Elongation A (%)	Reduction in cross section on fracture Z (%)	As-Heat-Treated Condition	Brinell hardness (HBW)
176 (≥)	839 (≥)	32	31	11	Solution and Aging, Annealing, Ausaging, Q+T,etc	313

Physical Properties of steel grade X12Ni5

Temperature (°C)	Modulus of elasticity (GPa)	Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and	Thermal conductivity (W/m·°C)	Specific thermal capacity (J/kg·°C)	Specific electrical resistivity (Ω mm²/m)	Density (kg/dm³)	Poisson’s coefficient, ν
21	-	-			0.43	-
319	741	-	14.3	113		-
215	-	34	44.2			123	222

Heat Treatment of steel grade X12Ni5

Heat treated : 1526°C - 1472°C

Technological Curves of steel grade X12Ni5

No Curve

Cross Reference Table (Equivalent Grade) of X12Ni5

Grade	Standard	Country	Application
X12Ni5	AFNOR	France	Fasteners with stainless steel and nickel alloy for high temperature and low temperature (NF-EN 10269(1999))
X12Ni5			Spain structural alloy steel

Available Suppliers

Jiangyou Longhai Special Steel Co.,Ltd.

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com

Do you supply this X12Ni5?
List your company on S&G now? Join
Non-paying users only

Stainless Steels

Tube/Pipe

Steel Profiles

Cold rolled/hot rolled

Wire rod

Quality special steel

Superalloy & High Temperature Alloy