630 Stainless Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Stainless Steel | 630 | |||
S44023 |
|||||
S44025 |
|||||
XM-32 |
|||||
S64152 |
|||||
XM-13 |
|||||
S13800 |
|||||
XM-12 |
|||||
S15500 |
|||||
632 |
|||||
S15700 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.07 | 1.00 | 1.00 | 0.040 | 0.030 | 15-17.5 | 3.0-5.0 |
Mo | Al | Cu | Nb | Ti | V | Ce |
3.0-5.0 | ||||||
N | Co | Pb | B | Other | ||
(Nb+Ta)0.15-0.45 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
148 (≥) | 378 (≥) | 31 | 34 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 422 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
12 | - | - | 0.31 | - | |||
245 | 629 | - | 11.3 | 244 | - | ||
765 | - | 42 | 12.2 | 324 | 111 |
Heat treated : 1132°C - 1298°C
Grade | Standard | Country | Application |
---|---|---|---|
AISI 630 | AISI | USA | precipitation hardening |
ASTM 630 | ASTM | USA | precipitation hardening |
UNS S63005 | UNS | USA | precipitation hardening |
UNS S63016 | UNS | USA | precipitation hardening |
UNS S63017 | UNS | USA | precipitation hardening |
UNS S63014 | UNS | USA | precipitation hardening |
UNS S63015 | UNS | USA | precipitation hardening |
UNS S63007 | UNS | USA | precipitation hardening |
UNS S63008 | UNS | USA | precipitation hardening |
UNS S63009 | UNS | USA | precipitation hardening |
UNS S63011 | UNS | USA | precipitation hardening |
UNS S63012 | UNS | USA | precipitation hardening |
UNS S63013 | UNS | USA | precipitation hardening |
UNS S63018 | UNS | USA | precipitation hardening |
SUS630 | JIS | Japan | precipitation-hardening stainless |
SUS630FB | JIS | Japan | precipitation hardening |
STS630 | precipitation hardened steel | ||
STS630 | precipitation hardened steel | ||
ICI 8630 | AISI | USA | |
CNS 630 | China | CNS standard precipitation hardening stainless steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
Rfq.: sales@longhaisteel.com