CPM Rex 25 Tool Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel | CPM Rex 25 | |||
Vanadis 4 |
|||||
CPM Rex M2HCHS |
|||||
CPM Rex M3 |
|||||
CPM Rex M4 |
|||||
CPM Rex M4HS |
|||||
CPM Rex M35HCHS |
|||||
CPM Rex M42 |
|||||
CPM Rex 45 |
|||||
CPM Rex 45HS |
|||||
CPM Rex 20 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
1.8 | 4.0 | |||||
Mo | Al | W | Nb | Ti | V | Ce |
6.5 | 12.5 | 5.0 | ||||
N | Co | Pb | B | Other | ||
AISI M61 | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
372 (≥) | 487 (≥) | 21 | 44 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 434 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
12 | - | - | 0.21 | - | |||
476 | 643 | - | 12.3 | 122 | - | ||
644 | - | 11 | 13.2 | 344 | 244 |
Heat treated : 1989°C - 1138°C
Grade | Standard | Country | Application |
---|---|---|---|
CPM H13 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM H19 | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM H19V | AISI | USA | Powder metallurgy tool steel Hot work tool steels |
CPM 9V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM 10V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM 440V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CPM Rex M2HCHS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M3 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M4 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M4HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M35HCHS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex M42 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 45 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 45HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 20 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 25 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex T15 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex T15HS | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 76 | AISI | USA | Powder metallurgy high-speed tool steel |
CPM Rex 76HS | AISI | USA | Powder metallurgy high-speed tool steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION