UK BHMA①:4-5-2 Carbide for cutting tools and BHMA①:4-5-2 Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Tool Steel And Hard Alloy | BHMA①:4-5-2 | UK | Carbide for cutting tools | |
BHMA①:4-4-4 |
|||||
BHMA①:3-4-4 |
|||||
BHMA①:3-4-4 |
|||||
BHMA①:3-5-3 |
|||||
BHMA①:3-5-3 |
|||||
BHMA①:2-6-3 |
|||||
BHMA①:2-6-3 |
|||||
BHMA①:1-8-2 |
|||||
BHMA①:1-8-2 |
|||||
BHMA①:4-5-2 |
Co(%) |
---|
6 |
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
972 (≥) | 287 (≥) | 12 | 34 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
41 | - | - | 0.41 | - | |||
215 | 367 | - | 43.3 | 442 | - | ||
265 | - | 23 | 43.2 | 322 | 334 |
Heat treated : 1628°C - 1947°C
Grade | Standard | Country | Application |
---|---|---|---|
BHMA①:9-1-9 | UK | Carbide for cutting tools | |
BHMA①:9-1-9 | UK | Carbide for cutting tools | |
BHMA①:7-1-9 | UK | Carbide for cutting tools | |
BHMA①:7-1-9 | UK | Carbide for cutting tools | |
BHMA①:9-2-6 | UK | Carbide for cutting tools | |
BHMA①:9-2-6 | UK | Carbide for cutting tools | |
BHMA①:6-3-5 | UK | Carbide for cutting tools | |
BHMA①:6-3-5 | UK | Carbide for cutting tools | |
BHMA①:7-2-6 | UK | Carbide for cutting tools | |
BHMA①:7-2-6 | UK | Carbide for cutting tools | |
BHMA①:4-4-4 | UK | Carbide for cutting tools | |
BHMA①:4-4-4 | UK | Carbide for cutting tools | |
BHMA①:3-4-4 | UK | Carbide for cutting tools | |
BHMA①:3-4-4 | UK | Carbide for cutting tools | |
BHMA①:3-5-3 | UK | Carbide for cutting tools | |
BHMA①:3-5-3 | UK | Carbide for cutting tools | |
BHMA①:2-6-3 | UK | Carbide for cutting tools | |
BHMA①:2-6-3 | UK | Carbide for cutting tools | |
BHMA①:1-8-2 | UK | Carbide for cutting tools | |
BHMA①:1-8-2 | UK | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION