UNS W07610 Mould Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Mould Steel | UNS W07610 | |||
UNS W07606 |
|||||
AWS E7XT-7 |
|||||
UNS W07607 |
|||||
AWS E7XT-8 |
|||||
UNS W07608 |
|||||
AWS E7XT-9 |
|||||
UNS W07609 |
|||||
AWS E7XT-9M |
|||||
UNS W07609 |
|||||
AWS E7XT-10 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Provisions mechanical properties, do not specify the composition | ||||||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
238 (≥) | 143 (≥) | 43 | 21 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 212 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
23 | - | - | 0.42 | - | |||
342 | 754 | - | 21.3 | 131 | - | ||
995 | - | 32 | 11.2 | 322 | 314 |
Heat treated : 1714°C - 1879°C
Grade | Standard | Country | Application |
---|---|---|---|
UNS G10300 | UNS | USA | General use carbon steel bar |
UNS G10050 | UNS | USA | General use carbon steel bar |
UNS G10060 | UNS | USA | General use carbon steel bar |
UNS G10080 | UNS | USA | General use carbon steel bar |
UNS G10110 | UNS | USA | General use carbon steel bar |
ASTM 1012 | ASTM | USA | General use carbon steel bar |
UNS G10120 | UNS | USA | General use carbon steel bar |
UNS G10130 | UNS | USA | General use carbon steel bar |
UNS G10150 | UNS | USA | General use carbon steel bar |
UNS G10160 | UNS | USA | General use carbon steel bar |
UNS G10170 | UNS | USA | General use carbon steel bar |
UNS G10180 | UNS | USA | General use carbon steel bar |
UNS G10190 | UNS | USA | General use carbon steel bar |
UNS G10200 | UNS | USA | General use carbon steel bar |
UNS G10210 | UNS | USA | General use carbon steel bar |
UNS T72301 | UNS | USA | Carbon tool steel |
W2-A | ASTM | USA | Carbon tool steel |
UNS T72302 | UNS | USA | Carbon tool steel |
UNS S42800 | UNS | USA | Martensitic special steel |
UNS S43100 | UNS | USA | Martensitic special steel |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION