GX25CrNiSi18 -9 Mould Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Mould Steel | GX25CrNiSi18 -9 | |||
GX40CrSi17 |
|||||
1.4740 |
|||||
GX40CrSi24 |
|||||
1.4745 |
|||||
GX40CrSi28 |
|||||
1.4776 |
|||||
GX130CrSi29 |
|||||
1.4777 |
|||||
GX160CrSi18 |
|||||
1.4743 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.15-0.35 | 0.50-2.50 | 2.00 | 0.040 | 0.030 | 17.0-19.0 | 8.00-10.0 |
Mo | Al | Cu | Nb | Ti | V | Ce |
≤ 0.50 | ||||||
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
989 (≥) | 761 (≥) | 44 | 11 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 224 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.34 | - | |||
423 | 762 | - | 31.3 | 234 | - | ||
179 | - | 31 | 32.2 | 122 | 324 |
Heat treated : 1285°C - 1467°C
Grade | Standard | Country | Application |
---|---|---|---|
CPM 9V | AISI | USA | Powder metallurgy tool steelCold work tool steel |
CQ-9 | AISI | USA | W-Co class carbide |
CY-9 | AISI | USA | W-Ti-Co class carbide |
X3NiCoMoTi18-9-5 | DIN | Germany | Cold working alloy tool steel |
X20CoCrWMo10-9 | DIN | Germany | Hot working alloy tool steel |
S2-9-2-8 | DIN | Germany | High-speed tool steel |
S2-9-1 | DIN | Germany | High-speed tool steel |
S2-9-2 | DIN | Germany | High-speed tool steel |
BHMA①:9-1-9 | Carbide for cutting tools | ||
BHMA①:9-1-9 | Carbide for cutting tools | ||
X1CrNiMoAl12-9 | AFNOR | France | Carbide for cutting tools |
X1CrNiMoAl12-9 | AFNOR | France | Carbide for cutting tools |
HS2-9-1 | AFNOR | France | Carbide for cutting tools |
HS2-9-1 | AFNOR | France | Carbide for cutting tools |
HS2-9-2 | AFNOR | France | Carbide for cutting tools |
HS2-9-2 | AFNOR | France | Carbide for cutting tools |
HS18-0-2-9 | AFNOR | France | Carbide for cutting tools |
HS18-0-2-9 | AFNOR | France | Carbide for cutting tools |
HS2-9-1-8 | AFNOR | France | Carbide for cutting tools |
HS2-9-1-8 | AFNOR | France | Carbide for cutting tools |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION