SAE W109 Commercial Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Carbon Steel | SAE W109 Commercial | |||
UNS T72301 |
|||||
ASTM W2-A |
|||||
UNS T72302 |
|||||
ASTM W2-C |
|||||
UNS T72302 |
|||||
ASTM W3 |
|||||
UNS T72305 |
|||||
AISI W108 Commercial |
|||||
SAE W108 Commercial |
|||||
AISI W109 Commercial |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.85-0.95 | 0.35 | 0.35 | 0.025 | 0.025 | 0.2 | |
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
733 (≥) | 881 (≥) | 32 | 14 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
12 | - | - | 0.33 | - | |||
265 | 747 | - | 31.3 | 231 | - | ||
541 | - | 34 | 41.2 | 223 | 231 |
Heat treated : 1819°C - 1638°C
Grade | Standard | Country | Application |
---|---|---|---|
SAE NVl(1541) | SAE | USA | precipitation hardening |
SAE NV2(1547) | SAE | USA | precipitation hardening |
SAE NV3 | SAE | USA | precipitation hardening |
SAE NV4(3140) | SAE | USA | precipitation hardening |
SAE NV5(8645) | SAE | USA | precipitation hardening |
SAE NV6(5150) | SAE | USA | precipitation hardening |
SAE NV7(4140) | SAE | USA | precipitation hardening |
SAE NV8 | USA | precipitation hardening | |
SAE NV9 | SAE | USA | precipitation hardening |
SAE HNVl | SAE | USA | precipitation hardening |
SAE HNV2 | SAE | USA | precipitation hardening |
SAE HNV3 | SAE | USA | precipitation hardening |
SAE HNV4 | SAE | USA | precipitation hardening |
SAE HNV5 | SAE | USA | precipitation hardening |
SAE HNV6 | SAE | USA | precipitation hardening |
SAE HNV7(71360) | SAE | USA | precipitation hardening |
SAE HNV8 | SAE | USA | precipitation hardening |
SAE EVl | SAE | USA | precipitation hardening |
SAE EV2 | SAE | USA | precipitation hardening |
SAE EV3 | SAE | USA | precipitation hardening |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION