SAE 3325 Carbon Steel and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.
Category | Type | Steel Grade | Standard | Country | Application |
---|---|---|---|---|---|
Steel Grades | Carbon Steel | SAE 3325 | |||
SAE 3230 |
|||||
AISI A3240 |
|||||
SAE 3240 |
|||||
SAE 3245 |
|||||
SAE 3250 |
|||||
AISI E3310 |
|||||
SAE 3310 |
|||||
SAE 3312 |
|||||
AISI E3316 |
|||||
SAE 3316 |
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.2-0.3 | 0.15-0.3 | 0.3-0.5 | 0.04 | 0.05 | 1.25-1.75 | 3.25-3.75 |
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV/Ku (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
512 (≥) | 494 (≥) | 42 | 32 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 |
Temperature (°C) |
Modulus of elasticity (GPa) |
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and | Thermal conductivity (W/m·°C) |
Specific thermal capacity (J/kg·°C) |
Specific electrical resistivity (Ω mm²/m) |
Density (kg/dm³) |
Poisson’s coefficient, ν |
---|---|---|---|---|---|---|---|
24 | - | - | 0.11 | - | |||
865 | 488 | - | 41.3 | 143 | - | ||
966 | - | 32 | 22.2 | 414 | 223 |
Heat treated : 1977°C - 1217°C
Grade | Standard | Country | Application |
---|---|---|---|
SAE NVl(1541) | SAE | USA | precipitation hardening |
SAE NV2(1547) | SAE | USA | precipitation hardening |
SAE NV3 | SAE | USA | precipitation hardening |
SAE NV4(3140) | SAE | USA | precipitation hardening |
SAE NV5(8645) | SAE | USA | precipitation hardening |
SAE NV6(5150) | SAE | USA | precipitation hardening |
SAE NV7(4140) | SAE | USA | precipitation hardening |
SAE NV8 | USA | precipitation hardening | |
SAE NV9 | SAE | USA | precipitation hardening |
SAE HNVl | SAE | USA | precipitation hardening |
SAE HNV2 | SAE | USA | precipitation hardening |
SAE HNV3 | SAE | USA | precipitation hardening |
SAE HNV4 | SAE | USA | precipitation hardening |
SAE HNV5 | SAE | USA | precipitation hardening |
SAE HNV6 | SAE | USA | precipitation hardening |
SAE HNV7(71360) | SAE | USA | precipitation hardening |
SAE HNV8 | SAE | USA | precipitation hardening |
SAE EVl | SAE | USA | precipitation hardening |
SAE EV2 | SAE | USA | precipitation hardening |
SAE EV3 | SAE | USA | precipitation hardening |
Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...
REQUEST FOR QUOTATION