US AMS standards for steel materials

Favorite Print

#US-AMS

AMS standards for steel materials

Review of AMS Standards for Steel consists of 4 volumes. It contains formally approved AMS standard classifications, guides, practices, specifications, test methods, and terminology and related material such as proposals.

Covers:

Group standards for carbon steels
Group standards for cast iron and low alloy steels
Group standards for cast corrosion and heat resistant steels
Group standards for wrought corrosion and heat resistant steels and alloys

The following data is given for each standard: standard number and year, grade, chemical composition, and mechanical properties (yield point, tensile strength, notch toughness). When deemed useful, steel type, manufacturing method, thickness of plate, heat treatment, and other data are described.

This group of AMS steel specifications covers the carbon and alloy steels, plates for boilers and other pressure vessels, plates sheet and strip, high-strength low-alloy, heat-treatable steels, hot and cold-rolled plates for cold forming, and spring steels. This volume features standards for various types of steel pipe which specify requirements for high-temperature service, ordinary use, and special applications such as fire protection use. Specifications for steel tubes list standard requirements for boiler and superheater tubes, general service tubes, still tubes in refinery service, heat exchanger and condenser tubes, mechanical tubing, and structural tubing. Steel casting specifications call out the standard properties for pressure purposes, and cast corrosion and heat resistant steels.

Group standards for carbon steels

AMS 5010H	1988	Steel bars. Screw stock Free machining, Cold drawn
AMS 5020D	1994	Steel bars, Forgings, and Tubing, Free cutting, 1.5Mn 0.5Pb
AMS 5022-L	1990	Steel bars, Forgings, and Tubing, Free cutting, 0.14-0.2 C
AMS 5024F	1985	Steel bars, Forgings, and Tubing, Free cutting, 1.5Mn
AMS 5027D	1996	Steel, Welding wire, 1.05Cr, 0.55Ni, 1.0Mo, 0.08V
AMS 5028C	1998	Steel, Welding wire, 1.05Cr, 0.55Ni, 1.0Mo, 0.07V
AMS 5029B	1984	Steel, Welding wire, 0.78Cr, 1.8Ni, 0.35Mo, 0.2V
AMS 5030G	1996	Steel, Welding wire, 0.06 Carbon maximum
AMS 5031E	1989	Welding electrodes, Covered steel, 0.07-0.15C
AMS 5036G	1985	Steel sheet and strip, Aluminum coated low carbon
AMS 5040K	1994	Steel sheet and strip, 0.15 Carbon, maximum Deep Forming Grade
AMS 5042K	1994	Steel sheet and strip, 0.15 Carbon, maximum Deep Forming Grade
AMS 5044H	1994	Steel sheet and strip, 0.15 Carbon, maximum Half hard temper
AMS 5045G	1994	Steel sheet and strip, 0.255 Carbon, maximum hard temper
AMS 5046A	1990	Sheet, strip and plate, carbon steel, annealed
AMS 5047D	1989	Steel sheet and strip, 0.08-0.13C, Deep forming grade
AMS 5050J	1989	Steel tubing, seamless, 0.15 carbon, maximum annealed
AMS 5053G	1990	Steel tubing, Welded, 0.13 carbon maximum, annealed
AMS 5060G	1997	Steel bars, forgings and tubing, 0.13-0.18C
AMS 5061E	1664	Steel, low carbon, bars and wire, 0.08-0.2C
AMS 5062F	1994	Steel, low carbon, bars, forgings
AMS 5069E	1990	Steel bars, forging and tubing, 0.15-0.2C
AMS 5070G	1990	Steel bars, and forging, 0.18-0.23C
AMS 5075E	1988	Steel tubing, seamless, 0.22-0.28C, Cold drawn and stress Relived
AMS 5077E	1989	Steel tubing, welded, 0.22-0.28C, Normalized or stress relived
AMS 5080H	1990	Steel bars, Forgings and tubing, 0.31-0.38C
AMS 5082E	1989	Steel tubing, seamless, 0.31-0.38C, Stress Relived
AMS 5085E	1997	Steel Sheet, Strip and plate, 0.47-0.55C
AMS 5110G	1995	Carbon steel wire, 0.75-0.88C, Spring temper, Cold drawn
AMS 5112K	1996	Carbon steel wire and springs, Spring quality music wire, 0.7-1.0C
AMS 5115K	1990	Wire, carbon steel, 0.6-0.75C, hardened and tempered
AMS 5120J	1988	Steel strip 0.68-0.8C
AMS 5121G	1990	Steel sheet and strip (0.9-1.4C) hard temper
AMS 5122G	1990	Steel strip (0.9-1.4C) hard temper
AMS 5132	1993	Steel bars, 0.9-1.3C

Group standards for cast iron and low alloy steels

AMS 5310F	1985	Iron castings, pearlitic malleable
AMS 5315D	1987	Ductile (nodular) iron castings, Rm=415MPa
AMS 5316D	1987	Ductile (nodular) iron castings, Rm=550MPa
AMS 5328D	1987	Steel castings, investment, 0.8C, 1.8Ni, 0.35Mo, Annealed
AMS 5329E	1987	Steel castings, sand 0.8C, 1.8Ni, 0.35Mo, Annealed
AMS 5330D	1987	Steel castings, investment, 0.8C, 1.8Ni, 0.35Mo, Annealed
AMS 5331F	1987	Steel sand castings, 0.8C, 1.8Ni, 0.35Mo, Normalized and tempered
AMS 5333D	1996	Steel, investment castings, 0.5Cr, 0.55Ni, 0.25Mo, Normalized
AMS 5334F	1996	Steel, investment castings, 0.5Cr, 0.55Ni, 0.20Mo, Normalized
AMS 5335E	1984	Castings-sand, 0.65Cr, 0.75Ni, 0.2Mo, Normalized and tempered
AMS 5336E	1995	Steel, investment castings, 0.95Cr, 0.2Mo, Normalized or Normalized and tempered
AMS 5337B	1995	Steel, maraging, investment castings, 18.5Ni, 9.0Co, 5.0Mo, 0.7Ti, 0.12Al, Vacuum melted homogenized, overaged and solution heat treated
AMS 5338D	1995	Steel, investment castings, 0.95Cr, 0.2Mo, Normalized or Normalized and tempered
AMS5339D	1995	Steel maraging, investment castings, 17Ni, 10Co, 4.6Mo, 0.3Ti, 0.06Al, homogenized, overaged, and solution heat treated

Group standards for cast corrosion and heat resistant steels

AMS 5340D	1997	Steel, corrosion resistant, investment castings, 14Cr, 4.25Ni, 2.25Mo, 0.25Cb, 3.25Cu, homogenization and solution heat treated
AMS 5341C	1985	Steel, corrosion resistant, investment castings 16Cr, 4.1Ni, 0.28Cb, 3.2Cu, homogenization, solution, and precipitation heat treated
AMS 5343D	1994	Steel corrosion resistant, investment casting 16Cr, 4.0Ni, 0.28Cb, 3.2Cu, homogenization, solution, and precipitation heat treated
AMS 5344D	1994	Steel, corrosion resistant, investment castings 16Cr, 4.1Ni, 0.28Cb, 3.2Cu, homogenization, solution, and precipitation heat treated
AMS 5346B	1996	Steel, corrosion resistant, investment castings 15Cr, 4.6Ni, 0.22Cb, 2.8Cu, homogenization, solution, and precipitation heat treated
AMS 5347A	1995	Steel, corrosion resistant, investment castings 15Cr, 4.6Ni, 0.22Cb, 2.8Cu, homogenization, solution, and precipitation heat treated
AMS 5348B	1985	Steel castings, tubular, centrifugal, corrosion resistant, 15Cr, 4.6Ni, 22(Cb+Ta), 2.8Cu, Solution heat treated
AMS 5349B	1984	Casting investment, 13Cr, Free machining, hardened and tempered
AMS 5350G	1987	Steel castings, investment, corrosion and moderate heat resistant, 12.5Cr, hardened and tempered
AMS 5351F	1987	Steel castings, sand, corrosion and moderate heat resistant, 13.0Cr, normalized and tempered
AMS 5352C	1982	Castings, investment, 17Cr, 0.55Mo, Annealed
AMS 5353B	1984	Castings, investment, 16Cr, 1.8Ni, 0.08N, as cast
AMS 5354D	1982	Castings, investment, 13Cr, 2.0Ni, 3.0W, Hardened and tempered
AMS 5355F	1995	Steel, corrosion resistant, investment castings, 16Cr, 4.1Ni, 0.28Cb, 3.2Cu, homogenization and solution heat treated
AMS 5356A	1995	Steel, corrosion resistant, investment castings, 15Cr, 4.6Ni, 0.22Cb, 2.8Cu, solution and precipitation heat treated
AMS 5357A	1994	Steel, corrosion resistant, investment castings, 15Cr, 4.6Ni, 0.22Cb, 2.8Cu, solution heat treated, precipitation and hardenable
AMS 5358C	1984	Steel castings, investment, corrosion resistant 18Cr, 9Ni, solution heat treated
AMS 5359D	1987	Steel castings, sand, corrosion and heat resistant 15Cr, 4.0Ni, .2.3Mo, 0.08N solution heat treated
AMS 5360E	1996	Steel, corrosion and heat resistant 15Cr, 4.0Ni, .2.3Mo, 0.08N, solution heat treated
AMS 5361E	1985	Steel castings, sand and centrifugal, corrosion and heat resistant 18.5Cr, 13.5Ni, 2.1Mo
AMS 5362H	1993	Steel, corrosion and heat resistant, 19Cr, 12Ni, 1.0(Cb+Ta), solution heat treated
AMS 5363E	1987	Steel castings, sand and centrifugal, corrosion and heat resistant 18.5Cr, 10.5Ni, 0.9(Cb+Ta), solution heat treated
AMS 5364B	1996	Steel, corrosion and heat resistant, 19.5Cr, 10.5Ni, 0.65Cb, solution heat treated
AMS 5365D	1982	Castings, sand, 24Cr, 20.5Ni, Solution heat treated
AMS 5366D	1996	Steel, corrosion and heat resistant, investment casting 25Cr 20Ni, as cast
AMS 5368C	1996	Steel, corrosion and heat resistant, investment casting 15Cr 4.0Ni, 2.3Mo, solution heat treated
AMS 5369D	1984	Castings sand, 19.5Cr, 9.5Ni, 1.4Mo, 1.4W, 0.5(Cb+Ta), 0.32Ti
AMS 5370C	1996	Steel, corrosion and heat resistant, investment casting 19Cr 9.5Ni, solution heat treatment
AMS 5371D	1987	Steel castings, sand, corrosion and heat resistant, 19Cr 9.5Ni, solution heat treatment
AMS 5372C	1984	Casings-sand, 16Cr1.9Ni, Normalized and tempered

Group standards for wrought corrosion and heat resistant steels and alloys

AMS 5500D	1991	Steel, Corrosion resistant, Laminated, Sheet surface bonded
AMS 5501D	1996	Steel, corrosion resistant, Sheet, Strip, and foil 19Cr, 9.5Ni, Cold rolled
AMS 5504K	1991	Steel sheet, strip and plate, Corrosion and heat resistant 12.5Cr, Annealed
AMS 5505D	1995	Steel, Corrosion and heat resistant, Sheet, Strip, and plate, 12Cr, ferrite controlled, annealed
AMS 5506E	1991	Steel, Corrosion and heat resistant, Sheet, Strip, and plate, 13Cr, annealed
AMS 5507E	1990	Steel sheet, strip and plate, corrosion and heat resistant, 17Cr 13Ni 2.5Mo, solution heat treated
AMS 5508E	1990	Steel, Corrosion and heat resistant, Sheet, Strip, and Plate, 13Cr, 2Ni, 3.0W, annealed
AMS 5510p	1999	Steel, Corrosion and heat resistant, Sheet, Strip, and plate, 18Cr, 10.5Ni, 0.4Ti, solutions heat treated
AMS 5511G	1999	Steel, Corrosion and heat resistant, Sheet, Strip, and plate, 19Cr, 9.5Ni, solution heat treated.
AMS 5512J	1992	Steel, Corrosion and heat resistant, Sheet, Strip, and plate, 18Cr, 10.5Ni, 0.8Cb, solution heat treated.
AMS 5513G	1999	Steel, Corrosion and heat resistant, Sheet, Strip, and plate, 19Cr, 9.2Ni, solution heat treated.
AMS 5514F	1992	Steel, Corrosion and heat resistant, Sheet, Strip, and plate, 18Cr, 11.5Ni, solution heat treated.
AMS 5515K	1996	Steel, Corrosion resistant, Sheet, Strip, and plate, 18Cr, 8.5Ni, solution heat treated, high ductility.
AMS 5516L	1992	Steel, Corrosion resistant, Sheet, Strip, and plate, 18Cr, 9.0Ni, solution heat treated.
AMS 5517L	1992	Steel, Corrosion resistant, Sheet, Strip, and plate, 18Cr, 8Ni, Cold rolled, Rm=862MPa
AMS 5518J	1999	Steel, Corrosion resistant, Sheet, Strip, and plate, 18Cr, 8Ni, Cold rolled, Rm=1034Mpa
AMS 5519L	1999	Steel, Corrosion resistant, Sheet, Strip, and plate, 18Cr, 8Ni, Cold rolled, Rm=1276 Mpa
AMS 5520E	1998	Steel, Corrosion and Moderate Heat Resistant, Sheet, Strip, Foil and Plate 15Cr, 7.1Ni, 2.5Mo, 1.1Al, Solution Heat Treated, Precipitation Hardenable
AMS 5521G	1994	Steel, Corrosion and Moderate Heat Resistant, Sheet, Strip and Plate 25Cr, 20Ni, Solution Heat Treated
AMS 5523E	1994	Steel, Corrosion and Moderate Heat Resistant, Sheet, Strip and Plate 23Cr, 1.5Ni, Solution Heat Treated
AMS 5524J	1999	Steel, Corrosion and Moderate Heat Resistant, Sheet, Strip and Plate 18Cr, 13Ni, 2.5Mo, Solution Heat Treated
AMS 5525G	1995	Steel, Corrosion and Moderate Heat Resistant, Sheet, Strip and Plate 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Solution Heat Treated
AMS 5526H	1989	Steel, Sheet, Strip and Plate, Corrosion and Heat Resistant, 19.5Cr, 9.5Ni, 1.4Mo, 1.4W, 0.42(Cb+Ta), 0.22Ti, Solution Heat Treated
AMS 5528F	1994	Steel, Corrosion Resistant, Sheet, Strip and Plate, 17Cr, 7.1Ni, 1.1Al, Solution Heat Treated, Precipitation Hardenable
AMS 5529E	1995	Steel, Corrosion Resistant, Sheet and Strip, 17Cr, 7.1Ni, 1.1Al, Solution Heat Treated and Cold Rolled Precipitation Hardenable, 0.038 to 1.27 mm Nominal Thickness
AMS 5546D	1995	Steel Sheet and Strip, Corrosion and Moderate Heat Resistant, 16.5Cr, 4.5Ni, 2.9Mo, 0.1N, Cold Rolled, Tempered
AMS 5547F	1992	Steel, Corrosion and Heat Resistant, Sheet and Strip, 15.5Cr, 4.5Ni, 2.9Mo, 0.1N, Solution Heat Treated
AMS 5548L	1998	Steel, Corrosion and Heat Resistant, Sheet and Strip, 16.5Cr, 4.5Ni, 2.9Mo, 0.1N, Annealed
AMS 5549F	1993	Steel Plate, Corrosion and Moderate Heat Resistant, 15.5Cr, 4.5Ni, 2.9Mo, 0.1N, Solution Heat Treated
AMS 5554C	1994	Steel, Corrosion and Heat Resistant, Seamless Tubing 16.5Cr, 4.5Ni, 2.9Mo, 0.1N, Annealed
AMS 5556G	1996	Steel Corrosion and Heat Resistant, Seamless or Welded Tubing, 18Cr, 11Ni, 0.7Cb, Solution Heat Treated
AMS 5557H	1996	Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing, 18.5Cr, 10.5Ni, 0.4Ti, Solution Heat Treated
AMS 5558E	1996	Steel, Corrosion and Heat Resistant, Welded Tubing, 18Cr, 10.5Ni, 0,7Cb, Thin Wall, Solution Heat Treated
AMS 5559H	1996	Steel, Corrosion and Heat Resistant, Welded Tubing, 18Cr, 10.5Ni, 0.4Ti, Thin Wall, Solution Heat Treated
AMS 5560H	1992	Steel, Corrosion Resistant, Seamless Tubing, 19Cr, 10Ni, Solution Heat Treated
AMS 5561E	1998	Steel, Corrosion and Heat Resistant, Welded and Drawn or Seamless and Drawn Tubing 9Mn, 20Cr, 6.5Ni, 0.28N, High-Pressure Hydraulic
AMS 5562C	1995	Steel, Corrosion and Heat Resistant, Seamless Tubing, 9Mn, 20Cr, 6.5Ni, 0.28N, Solution Heat Treated
AMS 5563B	1996	Steel, Corrosion and Heat Resistant, Seamless or Welded Tubing, 19Cr, 9.5Ni, Cold Drawn, Quarter-Hard Temper
AMS 5564B	1992	Steel, Corrosion Resistant, Tubing, 19Cr, 10Ni, High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless
AMS 5565J	1995	Steel, Corrosion Resistant, Welded Tubing, 19Cr, 9.5Ni, Solution Heat Treated
AMS 5566K	1995	Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr, 10Ni, High Pressure Cold Drawn
AMS 5567D	1996	Steel, Corrosion Resistant, Seamless or Welded Tubing, 19Cr, 10Ni, Hydraulic Annealed
AMS 5568E	1995	Steel, Corrosion and Heat Resistant, Welded Tubing, 17Cr, 7.1Ni, 1.1Al, Solution Heat Treated, Precipitation Hardenable
AMS 5569	1993	Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing, 19Cr, 9.5Ni, 0.03C max, Cold Drawn, One Eight-Hard Temper
AMS 5570M	1992	Steel, Corrosion and Heat Resistant, Seamless Tubing, 18Cr, 11Ni, 0.4Ti, Solution Heat Treated
AMS 5571G	1993	Steel, Corrosion and Heat Resistant, Seamless Tubing, 18Cr, 10.5Ni, 0.7(Cb+Ta), Solution Heat Treated
AMS 5572G	1996	Steel, Corrosion and Heat Resistant, Seamless Tubing, 25Cr, 20Ni, Solution Heat Treated
AMS 5573K	1996	Steel, Corrosion and Heat Resistant, Seamless Tubing, 17Cr, 12.5Ni, 2.5Mo, Solution Heat Treated
AMS 5574D	1993	Steel, Corrosion and Heat Resistant, Seamless Tubing, 23Cr, 13.5Ni, Solution Heat Treated
AMS 5575L	1994	Steel, Corrosion and Heat Resistant, Welded Tubing, 18Cr, 10.5Ni, Solution Heat Treated
AMS 5576H	1992	Steel, Corrosion and Heat Resistant, Welded Tubing, 18Cr, 10.5Ni, 0.4Ti, Solution Heat Treated
AMS 5577G	1995	Steel, Corrosion and Heat Resistant, Welded Tubing, 25Cr, 20Ni, Solution Heat Treated
AMS 5578D	1995	Steel, Corrosion and Heat Resistant, Welded Tubing, 12Cr, 8.5Ni, 0.3Cb, 1.1Ti, 2Cu, Vacuum Indiction Plus Vacuum Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable
AMS 5579C	1987	Steel, Corrosion and Heat Resistant Tubing, Welded, 19.5Cr, 9.5Ni, 1.4Mo, 1.4W, 0.42(Cb+Ta), 0.22Ti, Thin Wall
AMS 5584	1993	Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing, 17Cr, 12Ni, 2.5Mo, 0.03C max, Cold Drawn, One Eight-Hard Temper
AMS 5591H	1992	Steel, Corrosion and Heat Resistant, Seamless, Tubing 12.5Cr, Annealed
AMS 5595E	1992	Steel Corrosion Resistant, Sheet, Strip, and Plate, 9Mn, 20Cr, 6.5Ni, 0.28N, Solution Heat Treated
AMS 5600D	1992	Steel, Corrosion Resistant, Sheet Laminated, Edge Bonded
AMS 5603D	1984	Sheet and Strip, 15Cr, 8.4Ni, 2.2Mo, 1.1Al, Vacuum Induction Melted, Solution Heat Treated
AMS 5604D	1995	Steel, Corrosion Resistant, Sheet, Strip, and Plate, 16.5Cr, 4Ni, 4Cu, 0.3Cb, Solution Heat Treated, Precipitation Hardenable
AMS 5609C	1992	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr, 0.12Cb Ferrite Controlled, Annealed
AMS 5610L	1988	Steel Bars and Forgings, Corrosion and Moderate Heat Resistant, 12.5Cr, Low Carbon Free Machining
AMS 5611D	1993	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr, Ferrite Controlled, Consumable Electrode Melted
AMS 5612F	1994	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12Cr, Ferrite Controlled, Annealed
AMS 5613P	1995	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 12.5Cr, Annealed
AMS 5614D	1995	Steel, Corrosion And Heat Resistant, Bars, Wire, and Forgings, 12Cr, 0.5Mo, Annealed
AMS 5616	1999	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 13Cr, 2Ni, 3W, Annealed
AMS 5617G	1990	Steel Bars and Forgings, Corrosion Resistant, 12Cr, 8.5Ni, 1.2Ti, 2Cu, Vacuum Induction Plus Vacuum Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
AMS 5618D	1994	Steel, Corrosion Resistant, Bars, Wire, and Forgings, 17Cr, 0.52Mo, Consumable Electrode Vacuum Melted
AMS 5619	1970	Bars and Forgings, 14Cr, 4Mo
AMS 5620E	1989	Steel Bars and Forgings, Corrosion and Moderate Heat Resistant, 13Cr, Free Machining
AMS 5621D	1991	Steel Corrosion Resistant, Bars, Wire, and Forgings 13Cr, Annealed
AMS 5622B	1990	Steel Bars, Wire, Forgings, Tubing, and Rings, Corrosion Resistant, 16Cr, 4Ni, 0.3(Cb+Ta), 4Cu, Precipitation Hardenable, Consumable Electrode Melted, Solution Heat Treated
AMS 5623B	1990	Steel Bars and Forgings, High Expansion, 9.5Ni, 5.5Mn, Annealed
AMS 5624D	1989	Steel Bars High Expansion, 4.5Mn, 4Cr, 12.5Ni, Cold Finished
AMS 5625C	1990	Steel Bars, High Expansion, 9.5Ni, 5.5Mn, Cold Finished
AMS 5627F	1998	Steel Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing and Rings, 17Cr, Annealed
AMS 5628E	1996	Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing, 16.2Cr, 2.5Ni
AMS 5629D	1991	Steel, Corrosion Resistant, Bars, Forgings, Rings, and Extrusion, 13Cr, 8Ni, 2.2Mo, 1.1Al, Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
AMS 5630G	1993	Steel, Corrosion Resistant, Bars, Wire, and Forgings, 17Cr, 0.52Mo
AMS 5631C	1992	Steel, Corrosion Resistant, Bars and Forgings, 17Cr
AMS 5632F	1989	Steel Bars and Forgings, Corrosion Resistant, 17Cr, 0.5Mo, Free Machining
AMS 5635D	1992	Steel, Corrosion Resistant, Bars, Wire, and Forgings, 18Cr, 9Ni, 0.21Pb, Free Machining, Solution Heat Treated
AMS 5636E	1993	Steel, Corrosion Resistant, Bars and Wire, 18Cr, 9Ni, Solution Heat Treated and Cold Drawn, Rm=689Mpa, Tensile Strength
AMS 5637F	1993	Steel, Corrosion Resistant, Bars and Wire, 18Cr, 9Ni, Solution Heat Treated and Cold Drawn, Rm=862Mpa, Tensile Strength
AMS 5638 E	1995	Steel, Corrosion Resistant, Bars and Forgings, 0.14S, 18Cr, 9.5Ni, 0.5Mo, 0.8Al, Free-Machining; Swaging or Upsetting, Solution Heat Treated
AMS 5639G	1996	Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing, and Rings, 19Cr, 10Ni, Solution Heat Treated
AMS 5640R	1996	Steel, Corrosion Resistant, Bars, Wire, and Forgings, 18Cr, 9Ni, Free-Machining
AMS 5641F	1992	Steel, Corrosion Resistant, Bars, and Forgings, 18.5Cr, 10Ni, 0.22Se, Free-Machining; Swaging or Upsetting, Solution Heat Treated
AMS 5642J	1993	Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings, 18Cr, 10.5Ni, 0.6(Cb+Ta), Free-Machining, Solution Heat Treated
AMS 5643P	1999	Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing, and Rings, 16Cr, 4Ni, 0.3(Cb+Ta), 4Cu, Solution Heat Treated, Precipitation Hardenable
AMS 5644C	1964	Bars and Forgings, 17Cr, 7Ni, 1Al
AMS 5645N	1995	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 18Cr, 10Ni, 0.4Ti, Solution Heat Treated
AMS 5646L	1996	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 18Cr, 11Ni, 0.6Cb, Solution Heat Treated
AMS 5647G	1996	Steel, Corrosion Resistant, Bars, Wire, Forgings, Tubing and Rings, 19Cr, 9.5Ni, Solution Heat Treated
AMS 5648J	1996	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 17Cr, 12Ni, 2.5Mo, Solution Heat Treated
AMS 5649E	1994	Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings, 18Cr, 13Ni, 2.1Mo, Free Machining Solution Heat Treated
AMS 5650E	1995	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 23Cr, 13.5Ni, Solution Heat Treated
AMS 5651H	1996	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 25Cr, 20Ni, Solution Heat Treated
AMS 5652F	1992	Steel, Corrosion and Heat Resistant, Bars, Forgings, Tubing, and Rings, 25Cr, 20Ni, 2Si, Solution Heat Treated
AMS 5653E	1996	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing and Rings, 17Cr, 12Ni, 2.5Mo, Solution Heat Treated
AMS 5654D	1990	Steel Bars, Forgings, Tubing and Rings, Corrosion and Heat Resistant, 18Cr, 11Ni, 0.6(Cb+Ta), Consumable Electrode Melted, Solution Heat Treated
AMS 5655D	1995	Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings, 12.5Cr, 0.75Ni, 1Mo, 1W, 0.24V, Hardened and Tempered
AMS 5656C	1999	Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings, 9Mn, 20Cr, 6.5Ni, 0.27N, Solution Heat Treated
AMS 5657A	1960	Steel Bars and Forgings, Corrosion and Moderate Heat Resistant 15Cr, 7.1Ni, 2.5Mo, 1.1Al
AMS 5658C	1976	Steel Bars, Forgings, and Rings, Corrosion Resistant, 15Cr, 4.5Ni, 0.3(Cb+Ta), 3.5Cu
AMS 5659K	1998	Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions, 15Cr, 4.5Ni, 0.3Cb, 3.5Cu, Consumable Electrode Melted, Solution Hear Treated, Precipitation Hardenable
AMS 5672B	1987	Steel Wire, Corrosion Resistant, 11.8Cr, 8.5Ni, 0.3(Cb+Ta), 1.1Ti, 2Cu, Precipitation Hardenable, Spring Temper
AMS 5673D	1982	Steel Wire, Corrosion Resistant, 17Cr, 7.1Ni, 1.1Al, Precipitation Hardenable, Spring Temper
AMS 5674D	1991	Steel, Corrosion and Heat Resistant, Wire, 18Cr, 11.5Ni, 0.7(Cb+Ta), Solution Heat Treated
AMS 5678D	1995	Steel, Corrosion Resistant, Wire, 17Cr, 7.1Ni, 1.1Al, Cold Drawn, Precipitation-Hardenable
AMS 5680G	1994	Steel, Corrosion and Heat Resistant, Welding Wire, 18.5Cr, 11Ni, 0.4(Cb+Ta)
AMS 5681E	1996	Welding Electrodes, Covered, Steel, Corrosion and Heat Resistant, 19.5Cr, 10Ni, 0.6(Cb+Ta)
AMS 5685J	1992	Steel, Corrosion Resistant, Safety Wire, 18Cr, 11.5Ni, Solution Heat Treated, Cold Finished
AMS 5686F	1992	Steel, Corrosion Resistant, Rivet Wire, 18Cr, 11.5Ni, Solution Heat Treated
AMS 5688J	1992	Steel, Corrosion Resistant, Wire, 18Cr, 9Ni, Spring Temper
AMS 5689E	1995	Steel, Corrosion and Heat Resistant, Wire, 18Cr, 10.5Ni, 0.4Ti, Solution Heat Treated
AMS 5690K	1992	Steel, Corrosion and Heat Resistant, Wire, 17Cr, 12Ni, 2.5Mo, Solution Heat Treated
AMS 5691F	1989	Steel Welding Electrodes, Covered, Corrosion and Heat Resistant, 18.5Cr, 12.5Ni, 2.2Mo
AMS 5692B	1994	Steel, Corrosion and Heat Resistant, Welding Wire, 19Cr, 12.5Ni, 2.5Mg
AMS 5693B	1988	Steel, Corrosion Resistant, Wire, 18Cr, 9Ni, Cryogenically Produced, High Tensile Strength
AMS 5694G	1995	Steel, Corrosion and Heat Resistant, Welding Wire, 27Cr, 21.5Ni
AMS 5695F	1988	Steel, Corrosion and Heat Resistant, Covered Welding Electrodes, 25Cr, 20Ni
AMS 5696B	1996	Steel, Corrosion and Heat Resistant, Welding Wire, 19Cr, 12.5Ni, 2.5Mo, High Ferrite Grade
AMS 5697D	1991	Steel, Corrosion Resistant, Wire, 19Cr, 9.5Ni, Solution Heat Treated
AMS 5700E	1992	Steel, Corrosion and Heat Resistant, Bars, Forgings, and Rings, 13.5Cr, 13.5Ni, 0.35Mo, 2.2W, Annealed
AMS 5705D	1987	Steel, Corrosion and Heat Resistant, Bars and Forgings, 2.5Si, 8Ni, Annealed
AMS 5710E	1987	Steel Bars and Forgings, Corrosion and Heat Resistant, 20Cr, 2.2Si, 1.3Ni
AMS 5718B	1987	Steel Bars, Forgings, Tubing, and Rings, Corrosion Resistant, 11.8Cr, 1.8Mo, 0.33V, Annealed
AMS 5719B	1990	Steel Bars, Wire, Forgings, Tubing, Rings, and Extrusions, Corrosion Resistant, 11.8Cr, 2.5Ni, 1.8Mo, 0.33V, Vacuum Consumable Electrode Melted, Annealed
AMS 5726B	1990	Steel Bars and Wire, Corrosion and Heat Resistant, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Solution Heat Treated and Work-Strengthened, Consumable Electrode Melted
AMS 5731G	1995	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006, 0.3V, Consumable Electrode Melted, Solution Heat Treated
AMS 5732G	1995	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing and Rings, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Consumable Electrode Melted, Solution and Precipitation Heat Treated
AMS 5733E	1990	Steel Bars and Forgings, Corrosion and Heat Resistant, 13.5Cr, 26Ni, 3Mo, 1.8Ti
AMS 5734H	1995	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, and Tubing, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Consumable Electrode Melted, Solution Heat Treated
AMS 5735J	1974	Steel Bars, Forgings, Tubing, and Rings, Corrosion and Heat Resistant, 15Cr, 26Ni, 1.3Mo, 2.1Ti, 0.3V, Solution and Precipitation Heat Treated
AMS 5736G	1974	Steel Bars, Forgings, Tubing, and Rings, Corrosion and Heat Resistant, 15Cr, 26Ni, 1.3Mo, 2.1Ti, 0.3V, Solution Heat Treated
AMS 5737M	1995	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings and Tubing, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Consumable Electrode Melted, Solution and Precipitation Heat Treated
AMS 5738C	1989	Steel Bars, Corrosion Resistant, 18Cr, 9Ni, Free Machining, High Yield Strength, Solution Heat Treated and Cold Worked
AMS 5739D	1987	Steel, Corrosion and Moderate Heat Resistant, Bars, and Rings, 14.5Cr, 6.5Ni, 0.72Ti, Solution Heat Treated and Maraged, Rm=1240Mpa, Tensile Strength
AMS 5740D	1987	Steel Corrosion and Moderate Heat Resistant, Bars, Forgings, and Rings, 14.5Cr, 6.5Ni, 0.72Ti, Solution Heat Treated and Maraged, Rm=1070Mpa, Tensile Strength
AMS 5743H	1999	Steel, Corrosion and Heat Resistant, Bars and Forgings, 15.5Cr, 4.5Ni, 2.9Mo, 0.1N, Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-Tempered
AMS 5744D	1993	Steel, Corrosion and Heat Resistant, Bars and Forgings, 15.5Cr, 4.5Ni, 2.9Mo, 0.1N, Heat Treated, Rm=1172Mpa, Tensile Strength
AMS 5745E	1998	Steel, Corrosion and Heat Resistant, Bars and Forgings, 16.5Cr, 4.5Ni, 2.9Mo, 0.1N, Equalized and Over-Tempered
AMS 5749D	1999	Steel, Corrosion Resistant, Bars, Wire, Forgings, and Tubing, 14.5Cr, 4Mo, 1.2V, Premium Quality For Bearing Application, Double Vacuum Melted
AMS 5762D	1989	Steel Bars, Wire, and Forgings, Corrosion Resistant, 5.8Mn, 17Cr, 5.8Ni, 2Cu, 0.26S, Free Machining, Solution Heat Treated
AMS 5763B	1987	Steel Bars, Forgings, and Tubing, and Rings, Corrosion Resistant, 15Cr, 6.5Ni, 0.75Mo, 0.5(Cb+Ta), 1.5Cu, Solution Heat Treated
AMS 5764C	1997	Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings, 5Mn, 22Cr, 12.5Ni, 2.2Mo, 0.2Cb, 0.3N, 0.2V, Solution Heat Treated
AMS 5773C	1990	Steel Bars, Wire, Forgings, Tubing, and Rings, Corrosion Resistant, 15Cr, 6.5Ni, 0.75Mo, 0.3(Cb+Ta), 1.5Cu, Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable
AMS 5774D	1996	Steel, Corrosion and Heat Resistant, Welding Wire, 16.5Cr, 4.5Ni, 2.9Mo, 0.1N
AMS 5775C	1990	Welding Electrodes, Covered, Corrosion and Heat Resistant Steel, 16.5Cr, 4.5Ni, 2.9Mo, 0.1N
AMS 5776D	1996	Steel, Corrosion and Heat Resistant, Welding Wire, 12.5Cr
AMS 5777D	1988	Steel, Corrosion resistant, Covered Welding Electrodes, 12.5Cr
AMS 5780C	1992	Steel, Corrosion and Moderate Heat Resistant, Welding Wire, 15.5Cr, 4.5Ni, 2.9Mo, 0.1N
AMS 5781C	1985	Steel Welding Electrodes, Covered, Corrosion and Moderate Heat Resistant, 15.5Cr, 4.5Ni, 2.9Mo, 0.1N
AMS 5782E	1996	Steel, Corrosion and Heat Resistant, Welding Wire, 20.5Cr, 9Ni, 0.5Mo, 1.5W, 1.2Cb, 0.2Ti, Vacuum Induction Melted
AMS 5783E	1987	Steel Welding Electrodes, Covered, Corrosion and Heat Resistant, 19.5Cr, 8.8Ni, 0.5Mo, 1.5W, 1Cb
AMS 5784C	1992	Steel, Corrosion and Heat Resistant, Welding Wire, 29Cr, 9.5Ni
AMS 5790B	1997	Steel, Corrosion and Heat Resistant, Welding Wire, 20Cr, 10Ni, 0.75Cb, High Ferrite Grade
AMS 5803C	1996	Steel, Corrosion and Heat Resistant, Welding Wire, 16.4Cr, 4.8Ni, 0.22(Cb+Ta), 3.6Cu, Vacuum Melted
AMS 5804E	1993	Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr, 25.5Ni, 1.3Mo, 2.2Ti, 0.006B, 0.3V
AMS 5805F	1995	Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr, 25.5Mo, 2.1Ti, 0.004B, 0.3V, Vacuum Induction Melted, Environment Controlled Packaged
AMS 5808B	1998	Steel, Corrosion and Heat Resistant, Welding Wire, 19Cr, 13Ni, 2.5Mo, High Ferrite Grade, Trace Element Controlled
AMS 5810	1994	Steel, Corrosion and Heat Resistant, Flat Wire, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Solution Treated, Cold Drawn or Cold Rolled and Aged, Consumable Electrode melted
AMS 5811B	1995	Steel, Corrosion and Heat Resistant, Welding Wire, 15Cr, 30Ni, 1.2Mo, 2.2Ti, 25Al, 0.001B, 0.3V, Vacuum Induction Melted, Environmental Controlled Packaging
AMS 5812E	1992	Steel, Corrosion and Resistant, Welding Wire, 15Cr, 7.1Ni, 2.4Mo, 1Al, Vacuum Melted
AMS 5813C	1995	Steel Wire, Welding, Corrosion and Moderate Heat Resistant, 15Cr, 7.1Ni, 2.4Mo, 1Al
AMS 5817D	1992	Steel, Corrosion and Moderate Heat Resistant, Welding Wire, 13Cr, 2Ni, 3W
AMS 5818	1995	Steel, Corrosion and Heat Resistant, Welding Wire, 9Mn, 20Cr, 6.2Ni, 0.2N
AMS 5821E	1994	Steel, Corrosion Resistant, Welding Wire, 12Cr, Ferrite Control Grade
AMS 5822B	1993	Steel, Corrosion and Heat Resistant, Welding Wire, 11.8Cr, 2.8Ni, 1.6Co, 1.8Mo, 0.32V, Vacuum Induction Melted
AMS 5822	1993	Steel, Corrosion and Heat Resistant, Welding Wire, 11.8Cr, 2.8Ni, 1.6Co, 1.8Mo, 0.32V, Vacuum Induction Melted
AMS 5823D	1995	Steel, Corrosion and Heat Resistant, Welding Wire, 11.8Cr, 2.8Ni, 1.6Co, 1.8Mo, 0.32V
AMS 5824C	1992	Steel, Corrosion Resistant, Welding Wire, 17Cr, 7.1Ni, 1Al
AMS 5825E	1992	Steel, Corrosion Resistant, Welding Wire, 16.4Cr, 4.8Ni, 0.22Cb, 3.6Cu
AMS 5826B	1994	Steel, Corrosion And Heat Resistant, Welding Wire, 15Cr, 5.1Ni, 0.3Cb, 3.2Cu
AMS 5827E	1996	Steel, Corrosion Resistant, Covered Welding Electrodes, 16.4Cr, 4.8Ni, 0.22Cb, 3.6Cu
AMS 5840C	1992	Steel, Corrosion and Moderate Heat Resistant, Welding Wire, 13Cr, 8Ni, 2.3Mo, 1.1Al, Vacuum Melted
AMS 5848B	1997	Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, Tubing, and Rings, Wear and Galling Resistant, 8Mn, 4Si, 17Cr, 8.5Ni, 0.13N, Solution Heat Treated
AMS 5850C	1993	Steel, Corrosion and Heat Resistant, Honeycomb Comb Resistance Welded, Square Cell
AMS 5853A	1993	Steel, Corrosion and Heat Resistant, Bars and Wire, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Consumable Electrode Melted Solution Treated and Work-Strengthened, Rm=1103Mpa, Tensile Strength
AMS 5857	1990	Steel Bars and Wire, Corrosion Resistant, 19Cr, 10Ni, High Yield Strength, Solution Heat Treated and Cold Worked
AMS 5858B	1992	Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Multiple Melted, Solution Heat Treated, Welding Grade Precipitation Hardenable
AMS 5859C	1991	Steel, Corrosion Resistant, Sheet, Strip, and Plate, 15Cr, 6.5Ni, 0.75Mo, 0.3(Cb+Ta), 1.5Cu, Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable
AMS 5860D	1992	Steel, Corrosion and Moderate Heat Resistant, Sheet, Strip, and Plate, 12Cr, 8.5Ni, 0.3(Cb+Ta), 1.1Ti, 2Cu, Multiple Melted, Solution Heat Treated Precipitation Hardenable
AMS 5862E	1996	Steel, Corrosion Resistant, Sheet, Strip, and Plate, 15Cr, 4.5Ni, 0.3Cb, 3.5Cu, Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable
AMS 5863C	1995	Steel, Corrosion Resistant, Sheet, Strip, and Plate, 15Cr, 6.5Ni, 0.75Mo, 0.6Cb, 3.5Cu, Solution Heat Treated, Precipitation Hardenable
AMS 5864A	1993	Steel Corrosion Resistant, Plate, 13Cr, 8Ni, 2.2Mo, 1.1Al, Vacuum Induction Plus Consumable Electrode Melted, Solution Heat Treated, Precipitation Hardenable
AMS 5866B	1995	Steel, Corrosion Resistant, Flat Wire, 18Cr, 9Ni, Spring Temper
AMS 5867	1992	Steel, Corrosion and Heat Resistant, Forgings, 12.5Cr, Enhanced Fracture Toughness, Annealed
AMS 5868	1993	Steel, Corrosion Resistant, Seamless and Welded Aircraft Tubing, 19Cr, 9.5Ni, Cold Drawn, Half-Hard Temper
AMS 5880A	1994	Steel, Corrosion and Resistant, Bars, Wire and Forgings, 17Cr, 0.52Mo, For Bearing Application
AMS 5895B	1992	Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings, 15Cr, 25.5Ni, 1.2Mo, 2.1Ti, 0.006B, 0.3V, Consumable Electrode Melted, Solution Heat Treated, Welding Grade Precipitation Hardenable
AMS 5896	1994	Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing, 18.5Cr, 10.5Ni, 0.55Ti, Solution Heat Treated and Cold Drawn, One-Eighth Hard Temper
AMS 5897	1994	Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing, 18.5Cr, 11Ni, 0.8Cb, Solution Heat Treated and Cold Drawn, One-Eighth Hard Temper
AMS 5898	1995	Steel, Corrosion Resistant, Bars, Wire, and Forgings, 15.2Cr, 1Mo, 0.4N, Consumable Electrode melted Under Pressure
AMS 5899	1996	Steel, Corrosion Resistant, Bars, and Wire, and Forgings, 17Cr, 0.52Mo, Powder Metallurgy Product, Hot Isostatically Pressed
AMS 5900A	1989	Steel Bars, Forgings, and Tubing, Corrosion Resistant, 14Cr, 2.1Mo, 0.3Cb, 1V, Premium Aircraft Quality For Bearing Applications, Double Vacuum Melted
AMS 5901	1992	Steel Sheet, Strip, and Plate, Corrosion Resistant, 18Cr, 8Ni, Solution Heat Treated
AMS 5902	1992	Steel Sheet and Strip, Corrosion Resistant, 18Cr, 8Ni, Cold Rolled, Rm=1207MPa, Tensile Strength
AMS 5903	1992	Steel Sheet, Strip, and Plate, Corrosion Resistant, 18Cr, 9Ni, Cold Rolled, Rm=862MPa, Tensile Strength
AMS 5904	1992	Steel Sheet and Strip, Corrosion Resistant, 18Cr, 9Ni, Cold Rolled, Rm=1034MPa, Tensile Strength
AMS 5905	1992	Steel Sheet and Strip, Corrosion Resistant, 18Cr, 8Ni, Cold Rolled, Rm=1207MPa, Tensile Strength
AMS 5906	1992	Steel Sheet and Strip, Corrosion Resistant, 18Cr, 8Ni, Cold Rolled, Rm=1276 MPa, Tensile Strength
AMS 5907	1992	Steel Sheet, Strip, and Plate, Corrosion and Heat Resistant, 17Cr, 12Ni, 2.5Mo, Cold Rolled, Rm=862MPa, Tensile Strength
AMS 5910	1992	Steel Sheet, Strip, and Plate, Corrosion Resistant, 19Cr, 9.2Ni, Cold Rolled, Rm=862MPa, Tensile Strength
AMS 5911	1992	Steel Sheet and Strip, Corrosion Resistant, 19Cr, 9.2Ni, Cold Rolled, Rm=1034MPa, Tensile Strength
AMS 5912	1992	Steel Sheet and Strip, Corrosion Resistant, 19Cr, 9.2Ni, Cold Rolled, Rm=1207MPa, Tensile Strength
AMS 5913	1992	Steel Sheet and Strip, Corrosion Resistant, 19Cr, 9.2Ni, Cold Rolled, Rm=1276MPa, Tensile Strength
AMS 5925	1999	Steel, Corrosion Resistant, Bars, Wire, and Forgings, 15.5Cr, 18.8Mo, 0.2N, Electroslag Remelted
AMS 5930	1995	Steel, Corrosion Resistant, Bars and Forgings, 13Cr, 2.5Ni, 5.5Co, 2Mo, 0.6V, Vacuum Induction Plus Vacuum Consumable Electrode Melted
AMS 5931	1995	Steel, Bars, Wire, Forgings, Extrusions, Tubing, and Rings Wear, Galling, and Corrosion Resistant, 5Mn, 3.5Si, 16.5Cr, 5Ni, 0.14N, Solution Heat Treated
AMS 5932	1998	Steel, Corrosion and Heat Resistant, Bars, Forgings and Tubing, 14.5Cr, 2.3Ni, 12.5Co, 4Mo, 0.6V, 0.03Cb, Premium Aircraft-Quality, Carburizing Double Vacuum Melted
AMS 5933	1999	Steel, Corrosion Resistant Bars and Forgings, 12.5Cr, 1Ni, 15.5Co, 2Mo, Vacuum Induction Plus Vacuum Consumable Electrode Remelted
AMS 6250H	1988	Steel Bars, Forgings, and Tubing, 1.5Cr, 3.5Ni
AMS 6255B	1996	Steel Bars, Forgings, and Tubing, 1.1Si, 1.45Cr, 1Mo, 0.08Al, Double Vacuum Melted
AMS 6256B	1987	Steel, Bars, Forgings, and Tubing, 1Cr, 3Ni, 4.5Mo, 0.08Al, 0.38V, Premium Aircraft-Quality, Double Vacuum Melted
AMS 6257	1990	Steel Bars, Forgings, and Tubing 1.6Si, 0.82Cr, 1.8Ni, 0.4Mo, 0.08V, Consumable Electrode Vacuum Remelted Normalized and Tempered
AMS 6260M	1996	Steel Bars, Forgings, and Tubing, 1.2Cr, 3.2Ni, 0.12Mo
AMS 6263H	1991	Steel Bars, Forgings, and Tubing, 1.2Cr, 3.2Ni, 0.12Mo
AMS 6264	1994	Steel, Carburizing Grade, Bars, Forgings, and Tubing, 1.2Cr, 3.2Ni, 0.12Mo
AMS 6265J	1996	Steel Bars, Forgings, and Tubing, 1.2Cr, 3.25Ni, 0.12Mo
AMS 6266G	1987	Steel Bars, Forgings, and Tubing, 0.5Cr, 1.82Ni, 0.25Mo, 0.003B, 0.06V
AMS 6267E	1996	Steel, Bars, Forgings, and Tubing, 1.2Cr, 3.25Ni, 0.12Mo, Electroslag Remelted or Consumable Electrode Vacuum Remelted
AMS 6270M	1994	Steel Bars, Forgings, and Tubing, 0.5Cr, 0.55Ni, 0.2Mo
AMS 6272H	1991	Steel Bars, Forgings, and Tubing, 0.5Cr, 0.55Ni, 0.2Mo
AMS 6274	1991	Steel Bars, Forgings, and Tubing, 0.5Cr, 0.55Ni, 0.2Mo
AMS 6275F	1987	Steel Bars, Forgings, and Tubing, 0.4Cr, 0.45Ni, 0.12Mo, 0.002B
AMS 6276G	1999	Steel Bars, Forgings, and Tubing, 0.5Cr, 0.55Ni, 0.2Mo, Consumable Electrode Vacuum Melted
AMS 6277E	1995	Steel Bars, Forgings, and Tubing, 0.5Cr, 0.55Ni, 0.2Mo, Vacuum Arc or Electroslag Remelted
AMS 6278A	1991	Steel Bars, Forgings, and Tubing, 4.1Cr, 3.4Ni, 4.2Mo, 1.2V, Premium Aircraft-Quality for Bearing Application Double Vacuum Melted
AMS 6280H	1991	Steel Bars, Forgings, and Rings, 0.5Cr, 0.55Ni, 0.2Mo,
AMS 6281G	1990	Steel Tubing, Mechanical, 0.5Cr, 0.55Ni, 0.2Mo
AMS 6282G	1989	Steel Tubing, Mechanical, 0.5Cr, 0.55Ni, 0.25Mo
AMS 6290G	1999	Steel, Bars and Forgings, Carburizing, 1.8Ni, 0.25Mo
AMS 6292F	1987	Steel, Bars and Forgings, Carburizing, 1.8Ni, 0.25Mo
AMS 6294F	1985	Steel, Bars and Forgings, Carburizing, 1.8Ni, 0.25Mo
AMS 6299C	1985	Steel, Bars, Forgings and Tubing, 0.5Cr, 1.8Ni, 0.25Mo
AMS 6300C	1989	Steel Bars and Forgings, 0.25Mo
AMS 6302F	1994	Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.65Si, 1.25Cr, 0.5Mo, 0.25V
AMS 6303E	1991	Steel Bars and Forgings, Low Alloy, Heat Resistance, 0.65Si, 1.25Cr, 0.5Mo, 0.85V
AMS 6304H	1994	Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95Cr, 0.55Mo, 0.3V
AMS 6304A	1994	Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95Cr, 0.55Mo, 0.3V
AMS 6305C	1997	Steel, Heat Resistant, Bars, Forgings, and Tubing, 0.95Cr, 0.55Mo, 0.3V
AMS 6308B	1997	Steel, Bars and Forgings, 0.9Si, 1Cr, 2Ni, 3.2Mo, 2Cu, 0.1V, Vacuum Arc or Electroslag Remelted
AMS 6312E	1988	Steel Bars, Forgings, and Tubing, 1.8Ni, 0.25Mo
AMS 6317F	1991	Steel Bars and Forgings, 1.8Ni, 0.25Mo, Heat Treated, Rm=862MPa, Tensile Strength
AMS 6320K	1990	Steel Bars, Forgings, and Rings, 0.5Cr, 0.55Ni, 0.25Mo
AMS 6322K	1987	Steel Bars, Forgings, and Rings, 0.5Cr, 0.55Ni, 0.25Mo
AMS 6323J	1997	Steel, mechanical tubing 0.5Cr, 0.55Ni, 0.25Mo
AMS 6324F	1994	Steel bars, Forgings and tubing, 0.65Cr, 0.7Ni, 0.25Mo
AMS 6325G	1994	Steel bars and Forgings, 0.5Cr, 0.55Ni, 0.25Mo, Heat treated, Rm=724MPa
AMS 6327G	1988	Steel bars and Forgings, 0.5Cr, 0.55Ni, 0.25Mo, Heat treated, Rm=862MPa
AMS 6328J	1994	Steel bars, Forgings and tubing, 0.5Cr, 0.55Ni, 0.25Mo
AMS 6330E	1990	Steel bars, Forgings and tubing, 0.65Cr, 1.25Ni
AMS 6331A	1991	Steel, Welding wire, 0.5Cr, 0.55Ni, 0.2Mo, Vacuum melted, Environment Controlled Packaging
AMS 6342H	1990	Steel bars, Forgings and tubing, 0.8Cr, 1.0Ni, 0.25Mo
AMS 6345	1996	Steel, Sheet, Strip and Plate, 0.95Cr, 0.2Mo, Normalized or Otherwise Heat Treated
AMS 6346	1998	Steel Bars 0.95Cr, 0.2Mo, Hardened and tempered, Rm=862MPa
AMS 6348B	1994	Steel Bars 0.95Cr, 0.2Mo (0.28-0.33C), Normalized
AMS 6349B	1993	Steel Bars 0.95Cr, 0.2Mo (0.38-0.43), Normalized
AMS 6350H	1990	Steel Sheet, Strip and Plate, 0.95Cr, 0.20Mo
AMS 6351E	1990	Steel Sheet, Strip and Plate, 0.95Cr, 0.20Mo, Spheroidized
AMS 6352F	1990	Steel Sheet, Strip and Plate, 0.95Cr, 0.2Mo
AMS 6354D	1990	Steel Sheet, Strip and Plate, 0.75Si, 0.62Cr, 0.2Mo, 0.1Zr
AMS 6355L	1991	Steel Sheet, Strip and Plate, 0.5Cr, 0.2Mo, 0.55Ni
AMS 6356D	1989	Steel Sheet, Strip and Plate, 0.95Cr, 0.2Mo
AMS 6357G	1991	Steel Sheet, Strip and Plate, 0.5Cr, 0.2Mo, 0.55Ni (0.33-0.38C)
AMS 6358F	1987	Steel Sheet, Strip and Plate, 0.5Cr, 0.2Mo, 0.55Ni (0.38-0.43C)
AMS 6359F	1993	Steel Sheet, Strip and Plate, 0.8Cr, 1.8Ni, 0.25Mo (0.38-0.43C)
AMS 6360J	1990	Steel tubing, Seamless 0.95Cr, 0.2Mo (0.28-0.33C) Normalized and stress relived
AMS 6361C	1990	Steel tubing, Seamless 0.95Cr, 0.2Mo (0.28-0.33C) Rm=862MPa
AMS 6362D	1990	Steel tubing, Seamless 0.95Cr, 0.2Mo (0.28-0.33C) Rm=1034MPa
AMS 6363	1947	Steel tubing (Seamless), Round Chromium Molybdenum (0.27-0.33C)
AMS 6370K	1990	Steel Bars, Forgings and Rings, 0.95Cr, 0.2Mo (0.28-0.33C)
AMS 6371H	1993	Steel, Mechanical tubing, 0.95Cr, 0.2Mo (0.28-0.33C)
AMS 6372H	1990	Steel, Mechanical tubing, 0.95Cr, 0.2Mo (0.33-0.38C)
AMS 6373E	1995	Steel Welded Tubing 0.95Cr, 0.2Mo (0.28-0.33C)
AMS 6374A	1990	Steel tubing, Seam-free, Round 0.95Cr, 0.2Mo (0.28-0.33C), Rm=655MPa
AMS 6375A	1996	Steel Welding wire 0.5Cr, 0.55Ni, 0.2Mo (0.18-0.23C), Vacuum melted, Environment Controlled Packaging
AMS 6378E	1991	Steel bars, 1.0Cr, 0.2Mo, 0.045Se (0.39-0.48C), Die-Drawn, R0,2=896MPa, Free machining
AMS 6379A	1973	Bars, Die drown 0.95Cr, 0.29Mo, 0.05Te, Tempered
AMS 6381F	1998	Steel, Mechanical tubing 0.95Cr, 0.2Mo (0.38-0.43C)
AMS 6382L	1995	Steel Bars, Forgings and Rings 0.95CR, 0.2Mo (0.38-0.43C), Annealed
AMS 6385E	1990	Steel sheet, Strip and Plate, Low alloy, Heat resistant, 0.65Si, 1.25Cr, 0.5Mo, 0.25V
AMS 6386B	1974	Sheet and plate, Heat treated
AMS 6390C	1999	Steel tubing, Mechanical, 0.95Cr, 0.2Mo (0.38-0.43C)
AMS 6395D	1990	Steel Sheet, Strip and Plate 0.95Cr, 0.2Mo (0.38-0.43C)
AMS 6396B	1987	Steel Sheet, Strip and Plate 0.8Cr, 1.8Ni, 0.25Mo (0.49-0.55C), Annealed
AMS 6406C	1979	Steel Sheet, Strip and Plate 1.6Si, 2.1Cr, 0.58Mo, 0.05V (0.41-0.46C), Annealed
AMS 6407F	1995	Steel Bars, Forgings and tubing, 1.2Cr, 2.0Ni, 0.45Mo (0.27-0.33C)
AMS 6408A	1994	Steel, Hot work tool, Bars and forgings 5.2CR, 1.5Mo, 1.0V (0.35-0.45C), Elektroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR), Annealed
AMS 6409A	1996	Steel Bars, Forgings and tubing, 0.8Cr, 1.8Ni, 0.25Mo (0.38-0.43C), Special Aircraft Quality Cleanliness, normalized and tempered
AMS 6411D	1990	Steel Bars, Forgings and tubing, 0.88Cr, 1.8Ni, 0.25Mo (0.38-0.43C), Consumable Electrode Remelted
AMS 6412K	1994	Steel Bars and Forgings 0.8Cr, 1.8Ni, 0.25Mo (0.35-0.40C)
AMS 6413H	1990	Steel Tubing, mechanical, 0.8Cr, 0.8Ni, 0.25Mo (0.35-0.40C)
AMS 6414H	1998	Steel Bars, Forgings and Tubing 0.8Cr, 1.8Ni, 0.25Mo (0.38-0.43C), Vacuum Consumable Electrode Remelted
AMS 6415P	1997	Steel Bars, Forgings and Tubing 0.8Cr, 1.8Ni, 0.25Mo (0.38-0.43C)
AMS 6415B	1998	Steel Bars, Forgings and Tubing 0.8Cr, 1.8Ni, 0.25Mo (0.38-0.43C)
AMS 6416B	1981	Steel Bars, Forgings and Tubing 1.6Si, 0.82Cr, 1.8Ni, 0.4Mo, 0.07V (0.41-0.46C)
AMS 6417E	1996	Steel Bars, Forgings and Tubing 1.6Si, 0.82Cr, 1.8Ni, 0.4Mo, 0.08V, Consumable Electrode Vacuum Remelted
AMS 6418G	1992	Steel Bars, Forgings, Tubing and Rings 1.3 Mn, 1.5Si, 0.3Cr, 1.8Ni, 0.4Mo (0.23-0.28C)
AMS 6419E	1996	Steel Bars, Forgings and Tubing 1.6Si, 0.82Cr, 1.8Ni, 0.4Mo, 0.08V (0.40-0.45C), Consumable Electrode Vacuum Remelted
AMS 6421C	1989	Steel Bars, Forgings and Tubing 0.8Cr, 0.85Ni, 0.2Mo, 0.003B (0.35-0.40C)
AMS 6422F	1989	Steel Bars, Forgings and Tubing 0.8Cr, 0.85Ni, 0.2Mo, 0.003B, 0.04V (0.38-0.43C)
AMS 6423D	1990	Steel Bars, Forgings and Tubing 0.92Cr, 0.75Ni, 0.52Mo, 0.003B, 0.04V (0.40-0.46C)
AMS 6424C	1998	Steel Bars, Forgings and Tubing 0.8Cr, 1.8Ni, 0.25Mo (0.49-0.55C)
AMS 6425A	1996	Steel Bars, Forgings and Tubing 1.4Mo, 1.5Si, 0.3Cr, 1.8Ni, 0.4Mo (0.23-0.28C), Consumable Vacuum electrode Remelted
AMS 6426D	1990	Steel Bars, Forgings and Tubing 0.75Si, 1.0Cr, 0.58Mo (0.8-0.9C), Consumable Vacuum electrode Remelted
AMS 6427H	1993	Steel Bars, Forgings and Tubing 0.88Cr, 1.8Ni, 0.42Mo, 0.08V (0.28-0.33C)
AMS 6428E	1997	Steel Bars, Forgings and Tubing 0.8Cr, 1.8Ni, 0.35Mo, 0.2V (0.32-0.38C)
AMS 6429D	1990	Steel Bars, Forgings, Tubing and Rings 0.78Cr, 1.8Ni, 0.35Mo, 0.2V (0.33-0.38C), Consumable Vacuum electrode Remelted
AMS 6430E	1995	Steel Bars, Forgings, Tubing and Rings 0.75Mn, 0.78Cr, 1.8Ni, 0.35Mo, 0.2V (0.32-0.38C)
AMS 6431K	1996	Steel Bars, Forgings and Tubing 1.05Cr, 0.55Ni, 1.0Mo, 0.11V (0.45-0.5C), Consumable Vacuum electrode Remelted
AMS 6432A	1973	Steel Bars, Forgings and Tubing 1.05Cr, 0.55Ni, 1.0Mo, 0.12V (0.43-0.49C),
AMS 6433D	1989	Steel Sheet, strip and Plate, 0.75Mn, 0.8Cr, 1.8Ni, 0.35Mo, 0.2V (0.33-0.38C)
AMS 6434D	1989	Steel Sheet, strip and Plate, 0.78Cr, 1.8Ni, 0.35Mo, 0.2V (0.33-0.38C)
AMS 6435C	1984	Steel Sheet, strip and Plate, 0.78Cr, 1.8Ni, 0.35Mo, 0.2V (0.33-0.38C), Vacuum Consumable Electrode Melted, Annealed
AMS 6436B	1969	Steel Sheet, Strip and Plate, Low-alloy, heat resistant 0.65Si, 1.25Cr, 0.5Mo, 0.85V (0.25-0.30C), Annealed
AMS 6437E	1995	Steel Sheet, Strip and Plate, 5Cr, 1.3Mo, 0.5V (0.38-0.43C)
AMS 6438D	1990	Steel Sheet, Strip and Plate, 1.05Cr, 0.55Ni, 1.3Mo, 0.12V (0.45-0.50C), Consumable Electrode Vacuum Melted
AMS 6439B	1988	Steel Sheet, Strip and Plate, 1.05Cr, 0.55Ni, 1.0Mo, 0.12V (0.42-0.48C), Consumable Electrode Vacuum Melted, Annealed
AMS 6440K	1994	Steel Bars, Forgings and Tubing, 1.45Cr (0.98-1.1C) For Bearing Applications
AMS 6441H	1995	Steel Tubing, Mechanical, 1.45Cr (0.98-1.1C) For Bearing Applications
AMS 6442F	1987	Steel Bars and Forgings, 0.5Cr (0.98-1.1C) For Bearing Applications
AMS 6443F	1988	Steel Bars, Forgings, and Tubing 1.0Cr (0.98-1.1C) Consumable Electrode Vacuum Melted
AMS 6444H	1991	Steel Bars, Forgings, and Tubing 1.45Cr (0.98-1.1C) Premium Aircraft Quality, Consumable Electrode Vacuum Melted
AMS 6445F	1989	Steel Bars, Forgings, and Tubing 1.05Cr, 1.1Mn (0.92-1.02C) Consumable Electrode Vacuum Melted
AMS 6446D	1988	Steel Bars, Forgings, and Tubing 1.0Cr (0.98-1.1C) Electroslag Remelted
AMS 6447D	1992	Steel Bars, Forgings, and Tubing 1.45Cr (0.98-1.1C) Electroslag Remelted
AMS 6448G	1989	Steel Bars, Forgings, and Tubing 0.95Cr, 0.22V (0.48-0.53C)
AMS 6449D	1988	Steel Bars, Forgings, and Tubing 1.0Cr (0.98-1.1C), For Bearing Applications
AMS 6450G	1997	Steel Spring Wire and Springs 0.95Cr, 0.22V (0.48-0.53C), Annealed and cold drawn
AMS 6451A	1988	Steel Wire, Spring 1.4Si0.65Cr (0.51-0.59C), Annealed and cold drawn
AMS 6452B	1997	Steel Welding Wire 0.95Cr, 0.2Mo (0.38-0.43C) Vacuum Melted, Environment Controlled Packaging
AMS 6453A	1996	Steel Welding Wire 0.30Cr, 1.8Ni, 0.4Mo (0.23-0.28C) Vacuum Melted, Environment Controlled Packaging
AMS 6454B	1991	Steel Sheet, Strip and Plate 1.8Ni, 0.8Cr, 0.25Mo (0.38-0.43C) Consumable Electrode Vacuum Melted
AMS 6455G	1993	Steel Sheet, Strip and Plate, 0.95Cr, 0.22V (0.48-0.53C)
AMS 6456B	1996	Steel Welding Wire 0.8Cr, 1.8Ni, 0.25Mo (0.35-0.4C), Vacuum Melted. Environment-Controlled Packaging
AMS 6457B	1994	Steel Welding Wire 0.95Cr, 0.2Mo (0.28-0.33C), Vacuum Melted. Environment-Controlled Packaging
AMS 6458G	1994	Steel Welding Wire 0.65Si, 1.25Cr, 0.5Mo, 0.3V (0.28-0.33C), Vacuum Melted. Environment-Controlled Packaging
AMS 6459C	1996	Steel Welding Wire 1.0Cr, 1.0Mo, 0.12V (0.18-0.23C), Vacuum Melted.
AMS 6460D	1990	Wire, Steel Welding, 0.75Si, 0.62Cr, 0.2Mo, 0.1Zr, (0.1-0.17C)
AMS 6461H	1994	Steel Welding Wire, 0.95Cr, 0.2V, (0.28-0.33C), Vacuum Melted, Environment Controlled Packaging
AMS 6462G	1996	Steel, Welding Wire, 0.95Cr, 0.2V, (0.28-0.33V)
AMS 6463B	1990	Wire, Steel Welding, 18.5Ni, 8.5Co, 5.2Mo, 0.72Ti, 0.1Al, Vacuum Melted, Environment Controlled Packaging
AMS 6464F	1992	Steel, Welding Electrodes, Covered, 1.05Mo, 0.2V, (0.06-0.12C)
AMS 6465B	1990	Wire, Steel Welding, 2Cr, 10Ni, 8Co, 1Mo, 0.02Al, 0.06V, (0.1-0.14C), Vacuum Melted, Environment Controlled Packaging
AMS 6466E	1997	Steel, Corrosion Resistant, Welding Wire, 5.2Cr, 0.55Mo
AMS 6467C	1983	Electrodes, Covered Welding Steel, 5Cr, 0.55Mo
AMS 6468C	1998	Steel Welding Wire, 1Cr, 10Ni, 3.8Co, 0.45Mo, 0.08V, Vacuum Melted, Environment Controlled Packaging
AMS 6469B	1996	Steel, Welding Wire, 1.75Mn, 0.8Cr, 2.8Ni, 0.85Mo, (0.09-0.12C), Vacuum Melted, Environment Controlled Packaging
AMS 6470J	1990	Bars, Forgings, and Tubing, Nitriding Steel, 1.6Cr, 0.35Mo, 1.1Al, (0.38-0.43C)
AMS 6471D	1992	Steel Bars, Forgings, and Tubing, Nitriding Grade, 1.6Cr, 0.35Mo, 1.2Al, (0.38-0.43C), Consumable Electrode Vacuum Melted
AMS 6472C	1991	Steel Bars and Forgings, Nitriding, 1.6Cr, 0.35Mo, 1.1Al, (0.38-0.43C), Hardened and Tempered, Rm=772Mpa, Tensile Strength
AMS 6473A	1991	Steel Welding Wire, 0.88Cr, 1.8Ni, 1.6Co, 0.42Mo, 0.08V, (0.28-0.33c), Vacuum Melted, Environment Controlled Packaging
AMS 6474	1996	Forgings, Hardenable Steels, and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness
AMS 6475F	1992	Steel Bars, Forgings, and Tubing, Nitriding, 1.1Cr, 3.5Ni, 0.25Mo, 1.25Al, (0.21-0.26C)
AMS 6476A	1995	Steel, Bars, Forgings, and Tubing, 0.5Cr, 0.12Mo, (0.89-1.01C)
AMS 6477	1988	Steel Bars, Forgings, and Tubing, 0.8Cr, (0.9-1.03C), For Bearing Applications
AMS 6478	1994	Steel, Bars and Forgings, 3.1Cr, 11.5Ni, 13.5Co, 1.2Mo, (0.21-0.25C), Vacuum Melted, Annealed Heat Treatable to Rm=1999Mpa, Tensile Strength
AMS 6479	1996	Steel, Bars, Forgings, and Tubing, 1.45Cr, (0.98-1.1C), Special Aircraft-Quality Cleanliness
AMS 6481	1998	Steel Bars, Forgings, and Tubing, Nitriding, 3Cr, 1Mo, 0.2V, (0.29-0.36C), Premium Quality for Bearing Application Double Vacuum Melted
AMS 6484A	1997	Steel, Bars, Forgings, and Tubing, 0.8Cr, 1.8Ni, 0.25Mo, (0.38-0.43C), Normalized and Tempered
AMS 6485H	1989	Steel Bars and Forgings, 5Cr, 1.3Mo, 0.5V, (0.38-0.43C)
AMS 6487H	1996	Steel, Bars and Forgings, 5Cr, 1.3Mo, 0.5V, (0.38-0.43C), Consumable Electrode Vacuum Melted
AMS 6488F	1998	Steel, Bars and Forgings, 5Cr, 1.3Mo, 0.5V, (0.38-0.43C)
AMS 6490D	1989	Steel Bars, Forgings, and Tubing, 4Cr, 4.25Mo, 1V, (0.77-0.85C), Premium Aircraft Quality for Bearing Applications, Consumable Electrode Vacuum
AMS 6941A	1984	Steel Bars, Forgings, and Tubing, 4.1Cr, 4.2Mo, 1V, (0.8-0.85C), Premium Aircraft Quality for Bearing Applications, Double Vacuum Melted
AMS 6501B	1996	Steel, Maraging, Welding Wire, 18Ni, 8Co, 4.9Mo, 0.4Ti, 0.1Al, Vacuum Induction Melted, Environment Controlled Packaging
AMS 6512C	1991	Steel Bars, Forgings, Tubing, and Rings, 18Ni, 7.8Co, 4.9Mo, 0.4Ti, 0.1Al, Consumable Electrode Vacuum Melted, Annealed
AMS 6514D	1998	Steel, Maraging, Bars, Forgings, Tubing, and Rings, 18.5Ni, 9Co, 4.9Mo, 0.65Ti, 0.1Al, Consumable Electrode Vacuum Melted, Annealed
AMS 6518A	1987	Steel Sheet, Strip, and Plate, Maraging, 19Ni, 3Mo, 1.4Ti, 0.1Al, Double Vacuum Melted, Solution Heat Treated
AMS 6519A	1987	Steel Bars, Forgings, Tubing, and Rings, Maraging, 19Ni, 3Mo, 1.4Ti, 0.1Al, Double Vacuum Melted, Annealed
AMS 6520C	1995	Steel, Maraging, Sheet, Strip, and Plate, 18Ni, 7.8Co, 4.9Mo, 0.4Ti, 0.1Al, Consumable Electrode Melted, Solution Heat Treated
AMS 6521B	1983	Steel Sheet, Strip, and Plate, Maraging, 18.5Ni, 9Co, 4.9Mo, 0.65Ti, 0.1Al, Consumable Electrode Melted, Solution Heat Treated
AMS 6522A	1989	Steel Plate, 2Cr, 10Ni, 14Co, 1Mo, (0.13-0.17C), Vacuum Melted, Normalized, and Overaged
AMS 6523D	1995	Steel Sheet, Strip, and Plate, 0.75Cr, 9Ni, 4.5Co, 1Mo, 0.09V, (0.17-0.23C), Vacuum Consumable Electrode Melted, Annealed
AMS 6524D	1991	Steel, Sheet, Strip, and Plate, 1Cr, 7.5Ni, 4.5Co, 1Mo, 0.09V, (0.29-0.34C), Consumable Electrode Melted, Annealed
AMS 6525B	1997	Steel, Bars, Forgings, Tubing, and Rings, 0.75Cr, 9Ni, 4.5Co, 1Mo, 0.09V, (0.17-0.23C), Consumable Electrode Vacuum Melted
AMS 6526D	1997	Steel, Bars, Forgings, Tubing and Rings, 1Cr, 7.5Ni, 4.5Co, 1Mo, 0.09V, (0.29-0.34C), Consumable Electrode Vacuum Melted, Annealed
AMS 6527C	1996	Steel, Bars and Forgings, 2Cr, 10Ni, 14Co, 1Mo, (0.15-0.19C), Vacuum Melted, Normalized and Overaged
AMS 6528A	1996	Steel, Bars, 0.95Cr, 0.2Mo, (0.28-0.33C), Special Aircraft Quality Cleanliness Normalized
AMS 6529A	1996	Steel, Bars, 0.95Cr, 0.2Mo, (0.38-0.43C), Special Aircraft Quality Cleanliness Normalized
AMS 6530J	1995	Steel Tubing, Seamless, 0.5Ni, 0.55Cr, 0.2Mo, (0.28-0.33C)
AMS 6532A	1995	Steel, Bars and Forgings, 3.1Cr, 11.5Ni, 13.5Co, 1.2Mo, (0.21-0.25C), Vacuum Melted, Annealed
AMS 6533A	1996	Steel, Welding Wire, 2Cr, 10Ni, 14Co, 1Mo, (0.13-0.17C), Vacuum Melted, Environment Controlled Packaging
AMS 6535G	1982	Steel Tubing, Seamless, 0.5Cr, 0.55Ni, 0.2Mo, (0.28-0.33C)
AMS 6543B	1991	Steel Bars and Forgings, Maraging, 2Cr, 10Ni, 8Co, 1Mo, (0.1-0.14C), Double Vacuum Melted, Solution Heat Treated
AMS 6544B	1991	Plate, Maraging Steel, 2Cr, 10Ni, 8Co, 1Mo, (0.1-0.14C), Double Vacuum Melted, Solution Heat Treated
AMS 6546E	1991	Steel Sheet, Strip, and Plate, 0.48Cr 8Ni, 4Co, 0.48Mo, 0.09V, (0.24-0.3C), Consumable Electrode Melted, Annealed
AMS 6550H	1982	Steel Tubing, Welded, 0.5Ni, 0.55Cr, 0.2Mo, (0.28-0.33C)

Stainless Steels

Tube/Pipe

Steel Profiles

Cold rolled/hot rolled

Wire rod

Quality special steel

Superalloy & High Temperature Alloy