| Designation |
Title |
| ISO 5001:1999 |
Cold-reduced carbon steel sheet for vitreous enamelling |
| ISO 5002:1999 |
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
| ISO 5950:2000 |
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 5951:2001 |
Hot-rolled steel sheet of higher yield strength with improved formability |
| ISO 5952:1998 |
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance |
| ISO 5954:1998 |
Cold-reduced carbon steel sheet according to hardness requirements |
| ISO 6316:2000 |
Hot-rolled steel strip of structural quality |
| ISO 6317:2000 |
Hot-rolled carbon steel strip of commercial and drawing qualities |
| ISO 6930-1:2001 |
High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels |
| ISO 6932:2001 |
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| ISO 7452:2002 |
Hot-rolled structural steel plates -- Tolerances on dimensions and shape |
| ISO 7778:1983 |
Steel plate with specified through-thickness characteristics |
| ISO 7788:1985 |
Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements |
| ISO 9034:1987 |
Hot-rolled structural steel wide flats -- Tolerances on dimensions and shape |
| ISO 9328-1:1991 |
Steel plates and strips for pressure purposes -- Technical delivery conditions -- Part 1: General requirements |
| ISO 9328-2:1991 |
Steel plates and strips for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and low-alloyed steels with specified room temperature and elevated temperature properties |
| ISO 9328-3:1991 |
Steel plates and strips for pressure purposes -- Technical delivery conditions -- Part 3: Nickel-alloyed steels with specified low temperature properties |
| ISO 9328-4:1991 |
Steel plates and strips for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition |
| ISO 9328-5:1991 |
Steel plates and strips for pressure purposes -- Technical delivery conditions -- Part 5: Austenitic steels |
| ISO 9364:2001 |
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, lock-forming and structural qualities |
| ISO 9444:2002 |
Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths -- Tolerances on dimensions and form |
| ISO 9445:2002 |
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths -- Tolerances on dimensions and form |
| ISO 9473:1988 |
Textile machinery and accessories -- Strip steel for dents of reeds |
| ISO 10384:2001 |
Hot-rolled carbon steel sheet for machinery |
| ISO 11949:1995 |
Cold-reduced electrolytic tinplate |
| ISO 11950:1995 |
Cold-reduced electrolytic chromium/chromium oxide-coated steel |
| ISO 11951:1995 |
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel |
| ISO 13887:1995 |
Cold-reduced steel sheet of higher yield strength with improved formability |
| ISO 13976:1998 |
Hot-rolled steel sheet in coils of structural quality and heavy thickness |
| ISO 14590:1999 |
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability |
| ISO 14788:1998 |
Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils |
| ISO 16160:2000 |
Continuously hot-rolled steel sheet products -- Dimensional and shape tolerances |
| ISO 16162:2000 |
Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances |
| ISO 16163:2000 |
Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances |
| ISO 722:1991 |
Rock drilling equipment -- Hollow drill steels in bar form, hexagonal and round |
| ISO 1035-1:1980 |
Hot-rolled steel bars -- Part 1: Dimensions of round bars |
| ISO 1035-2:1980 |
Hot-rolled steel bars -- Part 2: Dimensions of square bars |
| ISO 1035-3:1980 |
Hot-rolled steel bars -- Part 3: Dimensions of flat bars |
| ISO 1035-4:1982 |
Hot-rolled steel bars -- Part 4: Tolerances |
| ISO 2938:1974 |
Hollow steel bars for machining |
| ISO 4951-1:2001 |
High yield strength steel bars and sections -- Part 1: General delivery requirements |
| ISO 4951-2:2001 |
High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels |
| ISO 4951-3:2001 |
High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels |
| ISO 9443:1991 |
Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions |
| ISO 2232:1990 |
Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes -Specifications |
| ISO 2408:2004 |
Steel wire ropes for general purposes -- Minimum requirements |
| ISO 2532:1974 |
Steel wire ropes -- Vocabulary |
| ISO 2701:1977 |
Drawn wire for general purpose non-alloy steel wire ropes -- Terms of acceptance |
| ISO 3108:1974 |
Steel wire ropes for general purposes -- Determination of actual breaking load |
