H13

This page provides H13 datasheet, H13 mechanical properties, chemical element H13, technical specifications of H13 steel material properties. H13 performance specifications.

Category Class Grade Standard Country Application
Steel GradesTool Die Steels H13 ASTM USA Hot-Work Tool Steel
Datasheet for:Steel Grades:Tool Die Steels:H13

Chemical composition(mass fraction)(wt.%) of the H13

Elements Min.(≥) Max.(≤)
C 0.32 0.45
Si 0.80 1.20
Mn 0.20 0.50
P - 0.030
S - 0.030
Cr 4.75 5.50
Mo 1.10 1.75
V 0.80 1.20
W - -
Ni+Cu - 0.75

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade H13

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
753 (≥) 265 (≥) 22 11 33 Solution and Aging, Annealing, Ausaging, Q+T,etc 224
Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
11 - -     0.11 -  
411 173 - 24.3 341   -  
522 - 41 31.2   132 134
Heat treated : 1963°C - 1415°C
The material does not have direct Metallography properties.
Directory is being updated.
The material does not have direct Metallography properties.
Directory is being updated.
Cross Reference Table(Equivalent Grade)
Grade Standard Country Application
A 564 S13800 SAE USA
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A 693 S13800 SAE USA
Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A 705 S13800 SAE USA
Age-Hardening Stainless Steel Forgings
S13800 AISI USA
Precipitation Hardenable Chromium Nickel Aluminum Molybdenum Stainless Steel
SA-564 S13800 AMS USA
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
SA-693 S13800 AMS USA
Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
SA-705 S13800 AMS USA
Specification for Age-Hardening Stainless Steel Forgings
A 564 XM-13 SAE USA
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A 693 Type XM-13 SAE USA
Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A 705 XM-13 SAE USA
Age-Hardening Stainless Steel Forgings
A 959 Type XM-13 SAE USA
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
F 899 Type XM-13 SAE USA
Standard Specification for Wrought Stainless Steels for Surgical Instruments
SA-564 XM-13 AMS USA
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
SA-693 Type XM-13 AMS USA
Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
SA-705 Type XM-13 AMS USA
Specification for Age-Hardening Stainless Steel Forgings
PH 13-8Mo ASTM USA
Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
PH 13-8Mo UNS USA
Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
20X23H13 GOST Russia
Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition
08X16H13M2Б GOST Russia
Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition
X45Cr13 DIN Germany
Corrosion-resistant high-temperature steel
Contact Suppliers with your enquiries for H13 any of the shape and size.

Haihong International Trade (HK) CO., Limited

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier.
H13 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.
TEL:+86-816-3646575 FAX: +86-816-3639422
M/B:+86-15386639257
E-mail: sales@tool-die-steels.com
Website: http://www.tool-die-steels.com/
Join Supplier: sales@steel-grades.com