Available 24/7 at contact@steel-grades.com

Description

Germany AWS DIN 1654-5 (1989) , DIN 17440 (1996) , DIN 17455 (1985) , DIN 17456 (1985) , DIN EN 10088-3 , DIN EN 10088-4 , DIN EN 10088-5 , DIN EN 10297-2 (2005) , DIN EN 10088-1 , DIN EN 10088-2 , DIN 17456 (1985) , DIN 5512-3 , DIN EN 10151 , DIN EN 10250-4 , DIN EN 10263-5 , DIN EN 10296-2 (2005) , X6Cr17 Specialsteel Cold heading and cold extruding steels; technical delivery conditions for stainless steels and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Specialsteel: X6Cr17
Category Class Grade Standard Country Application
Steel GradesSpecialsteel X6Cr17 AWS Germany Cold heading and cold extruding steels; technical delivery conditions for stainless steels

Chemical composition(mass fraction)(wt.%) of the X6Cr17

C Si Mn P S Cr
≤0.08 ≤1.00 ≤1.00 ≤0.040 ≤0.015 16.0 -18.0

Mechanical Properties of steel grade X6Cr17

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
774 (≥) 984 (≥) 21 31 31 Solution and Aging, Annealing, Ausaging, Q+T,etc 411

Physical Properties of steel grade X6Cr17

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
11 - -     0.13 -  
611 269 - 41.3 342   -  
512 - 12 34.2   411 414

Heat Treatment of steel grade X6Cr17

Heat treated : 1595°C - 1333°C

Technological Curves of steel grade X6Cr17

Cross Reference Table (Equivalent Grade) of X6Cr17

Grade Standard Country Application
X6Cr17
X6Cr17
X6Cr17

Relevant standard of X6Cr17

DIN 1654-5 (1989) Cold heading and cold extruding steels; technical delivery conditions for stainless steels DIN-1654-5-(1989)-.pdf
DIN 17440 (1996) Stainless steels - Technical delivery conditions for drawn wire DIN-17440-(1996)-.pdf
DIN 17455 (1985) Welded circular tubes of stainless steels for general requirements; technical delivery conditions DIN-17455-(1985)--.pdf
DIN 17456 (1985) Seamless circular tubes of stainless steels for general requirements; technical delivery conditions DIN-17456-(1985)-.pdf
DIN EN 10088-3 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes DIN-EN-10088-3-.pdf
DIN EN 10088-4 Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes DIN-EN-10088-4-.pdf
DIN EN 10088-5 Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes DIN-EN-10088-5-.pdf
DIN EN 10297-2 (2005) Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel DIN-EN-10297-2-(2005)-.pdf
DIN EN 10088-1 Stainless steels - Part 1: List of stainless steels DIN-EN-10088-1-.pdf
DIN EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes DIN-EN-10088-2-.pdf
DIN 17456 (1985) Seamless circular tubes of stainless steels for general requirements; technical delivery conditions DIN-17456-(1985)-.pdf
DIN 5512-3 Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard DIN-5512-3-.pdf
DIN EN 10151 Stainless steel strip for springs - Technical delivery conditions DIN-EN-10151-.pdf
DIN EN 10250-4 Open die steel forgings for general engineering purposes - Part 4: Stainless steels DIN-EN-10250-4-.pdf
DIN EN 10263-5 Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels DIN-EN-10263-5-.pdf
DIN EN 10296-2 (2005) Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel DIN-EN-10296-2-(2005)-.pdf

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this X6Cr17?
  • List your company on S&G now? Join
  • Non-paying users only
Top