Available 24/7 at sales@steel-grades.com

Ti-15V-3Cr-3Sn-2Al Ti Alloy

Description

Ti-15V-3Cr-3Sn-2Al Ti Alloy Ti Alloy and Mechanical Properties, Chemical Element, Cross Reference, Datasheet.

Datasheet for: Steel Grades:Ti Alloy: Ti-15V-3Cr-3Sn-2Al Ti Alloy

Chemical composition(mass fraction)(wt.%) of the Ti-15V-3Cr-3Sn-2Al Ti Alloy

 

Our to produce better steel-based products are the main used in industrial manufacturing various types Ti AlloyTi-15V-3Cr-3Sn-2Al plate,Ti-15V-3Cr-3Sn-2Al Round Bar,Ti-15V-3Cr-3Sn-2Al forgings,Ti-15V-3Cr-3Sn-2Al suppliers, Ti-15V-3Cr-3Sn-2Al Stock,Ti-15V-3Cr-3Sn-2Al sheet, Ti-15V-3Cr-3Sn-2Al flat bar, Ti-15V-3Cr-3Sn-2Al pipe,Ti-15V-3Cr-3Sn-2Al tube,Ti-15V-3Cr-3Sn-2Al mould,Ti-15V-3Cr-3Sn-2Al round ingot,Ti-15V-3Cr-3Sn-2Al cold-rolled steel,Ti-15V-3Cr-3Sn-2Al coil,Ti-15V-3Cr-3Sn-2Al strap steel,Ti-15V-3Cr-3Sn-2Al hot-rolled steel,Ti-15V-3Cr-3Sn-2Al medium plate, Ti-15V-3Cr-3Sn-2Al heavy plate,Ti-15V-3Cr-3Sn-2Al shapped bar,Ti-15V-3Cr-3Sn-2Al hexahedral bar,Ti-15V-3Cr-3Sn-2Al,Ti-15V-3Cr-3Sn-2Al slab ingot,Ti-15V-3Cr-3Sn-2Al slab,Ti-15V-3Cr-3Sn-2Al price,Ti-15V-3Cr-3Sn-2Al square bar,Ti-15V-3Cr-3Sn-2Al square steel,Ti-15V-3Cr-3Sn-2Al wire.Extending the industrial all kinds of mechanical industrial parts machining and, at the same time, using fine heat treatment process,tempering,hardening,heating,bright annealing,rotary hearth.chemical composition and Improving mechanical properties of Ti-15V-3Cr-3Sn-2Al.

 

Ti-15V-3Cr-3Sn-2Al Ti Alloy

Our advantages

Ti-15V-3Cr-3Sn-2Al properties and heat treatment forged piece, Including Ti-15V-3Cr-3Sn-2Al application and specifications, We have all specifications,Including Ti-15V-3Cr-3Sn-2Al steel plate, Ti-15V-3Cr-3Sn-2Al sheet, Ti-15V-3Cr-3Sn-2Al square steel, Ti-15V-3Cr-3Sn-2Al flat bar,Ti-15V-3Cr-3Sn-2Al round bar,Ti-15V-3Cr-3Sn-2Al forgings, we can own production and sales.


Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price

forged/hot rolling/ extrusion of steel


We can produce the Ti-15V-3Cr-3Sn-2Al has the following specifications:

Round bar steel: 1mm to 3000mm

Square-shape steel: 1mm to 2000mm

Plate steel:0.1mm to 2500mm

Width: 10mm to 2500mm

Lenth: We can supply any lenth based on the customer's requirement.

Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes

Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement

Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.

We serve you with our honesty, integrity, and professionality.


Chemical composition % of the ladle analysis of grade Ti-15V-3Cr-3Sn-2Al and Standards

 

Physical Properties Metric English Comments
Density 4.78 g/cc 0.173 lb/in³ Typical
 
Mechanical Properties Metric English Comments
Tensile Strength, Ultimate 1300 MPa 189000 psi Typical
Tensile Strength, Yield 1210 MPa
@Strain 0.200 %
175000 psi
@Strain 0.200 %
Typical
Elongation at Break 9.00 % 9.00 % Typical
Modulus of Elasticity 107 GPa 15500 ksi Typical
 
Thermal Properties Metric English Comments
CTE, linear 8.60 µm/m-°C
@Temperature 20.0 °C
4.78 µin/in-°F
@Temperature 68.0 °F
  9.20 µm/m-°C
@Temperature 20.0 - 250 °C
5.11 µin/in-°F
@Temperature 68.0 - 482 °F
  9.90 µm/m-°C
@Temperature 20.0 - 500 °C
5.50 µin/in-°F
@Temperature 68.0 - 932 °F
Specific Heat Capacity 0.500 J/g-°C 0.120 BTU/lb-°F
Thermal Conductivity 8.30 W/m-K 57.6 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air 288 °C 550 °F
Beta Transus 760 °C 1400 °F
 
Component Elements Properties Metric English Comments
Aluminum, Al 2.50 - 3.50 % 2.50 - 3.50 %
Carbon, C <= 0.050 % <= 0.050 %
Chromium, Cr 2.50 - 3.50 % 2.50 - 3.50 %
Hydrogen, H <= 0.015 % <= 0.015 %
Iron, Fe <= 0.25 % <= 0.25 %
Nitrogen, N <= 0.050 % <= 0.050 %
Oxygen, O <= 0.13 % <= 0.13 %
Tin, Sn 2.50 - 3.50 % 2.50 - 3.50 %
Titanium, Ti 72.6 - 78.5 % 72.6 - 78.5 % Calculated as remainder
Vanadium, V 14.0 - 16.0 % 14.0 - 16.0 %

 




Machining performance

Download Ti-15V-3Cr-3Sn-2Al the mechanical properties of the report, the report provides detailed performance analysis and application. Download >>


Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.


Machinability

Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.


Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.


Welding

Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.


Forging

Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.





Hot tags:Ti-15V-3Cr-3Sn-2Al steel plate, Ti-15V-3Cr-3Sn-2Al sheet, Ti-15V-3Cr-3Sn-2Al square steel, Ti-15V-3Cr-3Sn-2Al flat bar,Ti-15V-3Cr-3Sn-2Al round bar,Ti-15V-3Cr-3Sn-2Al forgings

 
 

关闭提示 关闭

 

确 认 取 消

Mechanical Properties of steel grade Ti-15V-3Cr-3Sn-2Al Ti Alloy

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
597 (≥) 364 (≥) 12 24 21 Solution and Aging, Annealing, Ausaging, Q+T,etc 123

Physical Properties of steel grade Ti-15V-3Cr-3Sn-2Al Ti Alloy

Temperature
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson’s coefficient, ν
31 - -     0.41 -  
828 797 - 23.3 121   -  
795 - 31 33.2   413 414

Heat Treatment of steel grade Ti-15V-3Cr-3Sn-2Al Ti Alloy

Heat treated : 1791°C - 1825°C

Technological Curves of steel grade Ti-15V-3Cr-3Sn-2Al Ti Alloy

Cross Reference Table (Equivalent Grade) of Ti-15V-3Cr-3Sn-2Al Ti Alloy

Grade Standard Country Application
X3NiCoMoTi18-9-5 DIN Germany Cold working alloy tool steel
X6NiCrTi26-15 DIN Germany Hot working alloy tool steel
X2NiCoMoTi18-8-5 AFNOR France Carbide for cutting tools
X2NiCoMoTi18-8-5 AFNOR France Carbide for cutting tools
Secotic TP15 SS Sweden Carbide for cutting tools
Secotic TP15 SS Sweden Carbide for cutting tools
Secotic TP25 SS Sweden Carbide for cutting tools
Secotic TP25 SS Sweden Carbide for cutting tools
Secotic TP35 SS Sweden Carbide for cutting tools
Secotic TP35 SS Sweden Carbide for cutting tools
X2CrTiNb18 DIN Germany Stainless steel
X3CrTi17 DIN Germany Stainless steel
X2CrTi12/X6CrTi12 DIN Germany Stainless steel
X2CrMoTi18-2 DIN Germany Stainless steel
X6CrNiTi18-10 DIN Germany Stainless steel
X2NiCrAITi32-20 DIN Germany Stainless steel
X10CrNiMoTi18-12 DIN Germany Stainless steel
X3CrNiMoTi25-25 DIN Germany Stainless steel
X7CrTi12 DIN Germany Stainless steel
X10NiCrAITi32-21(20) DIN Germany Stainless steel

Available Suppliers

Our main peoducts of steel are many kinds of special steel, like tool steel, mould steel, alloy steel, alloy constructural steel, heat-resistant steel, high speed tool steel,spring steel and bearing steel , stainless steel and so on, which have formed 12 series and more than 350 varieties with n...

Rfq.: sales@longhaisteel.com
  • Do you supply this Ti-15V-3Cr-3Sn-2Al Ti Alloy?
  • List your company on S&G now? Join
  • Non-paying users only
Sidebar RFQs Menu My Account
Top